The download hangar is currently disabled. We're doing our best to bring it back as soon as possible.
RNAS Culdrose by Gary Barker
RNAS Culdrose by Gary Barker
Post support related comments for this package in this thread. The Package Manager will look into your problem as soon as possible.
NOTE 1: Keep this thread clean and post ONLY support related comments here. For all other discussions about this package, please reply to the release announcement.
NOTE 2: We will only provide support for bugs in our packages, not for conflicts with other addons in a user's highly modified simulator setup.
NOTE 3: Support for FSX users will not be offered in this thread. Instead FSX community support can be had from other users by posting questions in our "Unofficial Flight Simulator X Forums".
NOTE 1: Keep this thread clean and post ONLY support related comments here. For all other discussions about this package, please reply to the release announcement.
NOTE 2: We will only provide support for bugs in our packages, not for conflicts with other addons in a user's highly modified simulator setup.
NOTE 3: Support for FSX users will not be offered in this thread. Instead FSX community support can be had from other users by posting questions in our "Unofficial Flight Simulator X Forums".
-
- Captain
- Posts: 358
- Joined: 12 Aug 2006, 07:49
- Version: FSX
- Location: Abertillery,South Wales. UK
Re: RNAS Culdrose by Gary Barker
Having a problem with downloading, it gets to 52% of the zip and stops? Tried 3 times and the same every time. Tried asgain and on the fifth go it got to 75% of zip 55.5 MB previous attemts 40.3 MB.
Past Beta Tester
Re: RNAS Culdrose by Gary Barker
Google Chrome blocked this download as malicious three times and I had to go into Google Chrome's advanced settings and under privacy remove the check from the "Protect you and your device from dangerous sites" option in order to prevent the block.
I've never seen this with an MAIW download before and I just did a quick download of another MAIW package and it was not blocked with the "Protect you and your device from dangerous sites" option checked in the Google Chrome advanced settings.
Must have been a false positive on the MAIW RNAS Culdrose download by Google Chrome.
I've never seen this with an MAIW download before and I just did a quick download of another MAIW package and it was not blocked with the "Protect you and your device from dangerous sites" option checked in the Google Chrome advanced settings.
Must have been a false positive on the MAIW RNAS Culdrose download by Google Chrome.
Last edited by mikewmac on 09 Oct 2015, 17:34, edited 1 time in total.
Re: RNAS Culdrose by Gary Barker
Not much we can do about that, unfortunately. We've been having time-out issues with our servers for quite a while now.
The only thing I can suggest is to try again later.
The only thing I can suggest is to try again later.
- Garysb
- MAIW Developer
- Posts: 2807
- Joined: 11 Aug 2006, 19:33
- Version: FSX
- Location: Scunthorpe, North Lincolnshire, UK
Re: RNAS Culdrose by Gary Barker
Be aware that if you are following the AI helicopters they may be out of frame due to the take off animations.
Thought I would pre-empt that one
Thought I would pre-empt that one
I believe that every human has a finite number of heart-beats. I don't intend to waste any of mine running around doing exercises.
Buzz Aldrin (1930 -
Buzz Aldrin (1930 -
Re: RNAS Culdrose by Gary Barker
Thank you for this large package.
Two observations I made after installing:
1)
At Glasgow-Prestwick I found an AFCAD file named MAIW_AF2_EGP1_UKMIL.bgl, dated /04/2005, which is made for helicopter operations.
Anybody knows from which package this file comes from?
2)
On the HU5 Sea King model one of the main rotor blades is almost completely yellow while on the other 4 rotor blades only the tip of the blade is yellow. Is this intended to be like that or is this a "mapping issue"?
On the ASaC7 model only the tips of the rotor blades are yellow.
Two observations I made after installing:
1)
At Glasgow-Prestwick I found an AFCAD file named MAIW_AF2_EGP1_UKMIL.bgl, dated /04/2005, which is made for helicopter operations.
Anybody knows from which package this file comes from?
2)
On the HU5 Sea King model one of the main rotor blades is almost completely yellow while on the other 4 rotor blades only the tip of the blade is yellow. Is this intended to be like that or is this a "mapping issue"?
On the ASaC7 model only the tips of the rotor blades are yellow.
- jimrodger
- Lieutenant Colonel
- Posts: 1489
- Joined: 22 Apr 2008, 13:34
- Version: FS9
- Location: EGQK (RIP)
Re: RNAS Culdrose by Gary Barker
In the Merlin FPs the Prestwick Heli ICAO is designated as EGP1, whereas the RN Sea Kings are using E1PK.
Am I losing the plot or is there a reason for this.
I have an AFCAD for EGP1 from a previous installation (the AAC WAH-64 Apache package) and it doesn't seem to line up on anything in particular.
Love the package, just abit confused at the mo.
Jim
Am I losing the plot or is there a reason for this.
I have an AFCAD for EGP1 from a previous installation (the AAC WAH-64 Apache package) and it doesn't seem to line up on anything in particular.
Love the package, just abit confused at the mo.
Jim
"When all else fails, and your AI doesn't show up...... check the AI slider.......DOH!!!!"
- clickclickdoh
- MAIW Developer
- Posts: 1568
- Joined: 03 Mar 2009, 03:04
Re: RNAS Culdrose by Gary Barker
hawk_sh wrote:2)
On the HU5 Sea King model one of the main rotor blades is almost completely yellow while on the other 4 rotor blades only the tip of the blade is yellow. Is this intended to be like that or is this a "mapping issue"?
On the ASaC7 model only the tips of the rotor blades are yellow.
Re: RNAS Culdrose by Gary Barker
clickclickdoh wrote:hawk_sh wrote:2)
On the HU5 Sea King model one of the main rotor blades is almost completely yellow while on the other 4 rotor blades only the tip of the blade is yellow. Is this intended to be like that or is this a "mapping issue"?
On the ASaC7 model only the tips of the rotor blades are yellow.
Thanks, never seen that before.
- Garysb
- MAIW Developer
- Posts: 2807
- Joined: 11 Aug 2006, 19:33
- Version: FSX
- Location: Scunthorpe, North Lincolnshire, UK
Re: RNAS Culdrose by Gary Barker
Bismark you are correct they do just sit off the floor, to be honnest I never looked that close
Will just need a slight mod to the contact points I believe, I will get john to have a look
With regards to the paints firstly make sure your textures are set to massive
@ jim
I will have a look at the preswick afcad and come back to you
Gary
Will just need a slight mod to the contact points I believe, I will get john to have a look
With regards to the paints firstly make sure your textures are set to massive
@ jim
I will have a look at the preswick afcad and come back to you
Gary
I believe that every human has a finite number of heart-beats. I don't intend to waste any of mine running around doing exercises.
Buzz Aldrin (1930 -
Buzz Aldrin (1930 -
Re: RNAS Culdrose by Gary Barker
I have the newest UK2000 scenery for Prestwick (the FS9 version). Does anyone have a AFCAD for that scenery that has parking for these new helicopters?
- jimrodger
- Lieutenant Colonel
- Posts: 1489
- Joined: 22 Apr 2008, 13:34
- Version: FS9
- Location: EGQK (RIP)
Re: RNAS Culdrose by Gary Barker
Re the rotor blade colouring: the top surface and about a foot from the tip on the underside was painted differently to give a strobe effect to enable the sar helos to be seen easier when in the hover. The underside paint job was more for the crew to see the limit of the rotor disc and its proximity to obstacles. Hope this clears any confusion.
Sent from my KFJWI using Tapatalk
Sent from my KFJWI using Tapatalk
"When all else fails, and your AI doesn't show up...... check the AI slider.......DOH!!!!"
- Tranquil
- MAIW Developer
- Posts: 1205
- Joined: 12 Mar 2008, 23:11
- Version: MSFS
- Location: England, Merseyside
Re: RNAS Culdrose by Gary Barker
If you copy over the afcad MAIW_AF2_E1PK.bgl from Garys Prestwick scenery folder to your uk2000 Prestwick scenery folder you should be able to use that, otherwise they will use the main runways...Joseph29 wrote:I have the newest UK2000 scenery for Prestwick (the FS9 version). Does anyone have a AFCAD for that scenery that has parking for these new helicopters?
Much thanks
Mark
The spice extends life. The spice expands consciousness. The spice is vital to space travel.
- Garysb
- MAIW Developer
- Posts: 2807
- Joined: 11 Aug 2006, 19:33
- Version: FSX
- Location: Scunthorpe, North Lincolnshire, UK
Re: RNAS Culdrose by Gary Barker
Sorry for the contact points the modification got lost somewhere in the flow
Please find attached an update V1.03 to the FDE and .air file - just overwrite files in the Merlin aircraft folder
Also new touchdown effect added - copy into effects folder
Greg can you update the installer please
I will look into the afcad issue on Sunday
Gary
Please find attached an update V1.03 to the FDE and .air file - just overwrite files in the Merlin aircraft folder
Also new touchdown effect added - copy into effects folder
Greg can you update the installer please
I will look into the afcad issue on Sunday
Gary
- Attachments
-
- JEAI Merlin Update V 1.03.zip
- (13.34 KiB) Downloaded 99 times
I believe that every human has a finite number of heart-beats. I don't intend to waste any of mine running around doing exercises.
Buzz Aldrin (1930 -
Buzz Aldrin (1930 -
Re: RNAS Culdrose by Gary Barker
Hi there, I am having download problems with this file. I am not using google chrome, but straight forward internet explorer. I keep getting interruption at about 60%. This is the first time I have ever has this problem with your site. Any suggestions
Thanks
Paul
Thanks
Paul
-
- Second Lieutenant
- Posts: 68
- Joined: 12 Jun 2011, 20:14
- Version: FSX
- Location: EGUD
Re: RNAS Culdrose by Gary Barker
Hi,
Same as with the latest Jayhawk package I can't seem to download this package. I've tried Chrome and IE but get to about 80% then get a download interrupted message. On the restart, it completes but then the zip file is empty.
I'll try on the other laptop tomorrow and at least I can pop it on a memory stick and transfer it over if it works but not sure why this is happening for the second package. Hopefully this is an issue you guys can look into as I've never had this issue before an I'm always impressed with the packages you produce. Hopefully it will transfer into FSX ok as well???
Same as with the latest Jayhawk package I can't seem to download this package. I've tried Chrome and IE but get to about 80% then get a download interrupted message. On the restart, it completes but then the zip file is empty.
I'll try on the other laptop tomorrow and at least I can pop it on a memory stick and transfer it over if it works but not sure why this is happening for the second package. Hopefully this is an issue you guys can look into as I've never had this issue before an I'm always impressed with the packages you produce. Hopefully it will transfer into FSX ok as well???
Re: RNAS Culdrose by Gary Barker
Installed the new FDE. Ok when Merlin is taxing but, when parked, the wheels are not on ground.
Giorgio
Giorgio
- Garysb
- MAIW Developer
- Posts: 2807
- Joined: 11 Aug 2006, 19:33
- Version: FSX
- Location: Scunthorpe, North Lincolnshire, UK
Re: RNAS Culdrose by Gary Barker
Bismark, There is a very very slight discepency on the rear wheels depends on which way you are looking at it
I will see if Mike Mac can adjust it anymore.
Gary
I will see if Mike Mac can adjust it anymore.
Gary
I believe that every human has a finite number of heart-beats. I don't intend to waste any of mine running around doing exercises.
Buzz Aldrin (1930 -
Buzz Aldrin (1930 -
-
- Colonel
- Posts: 2163
- Joined: 06 Mar 2011, 16:48
- Version: FS9
- Location: Belgium
Re: RNAS Culdrose by Gary Barker
On my PC, the wheels are on the ground, with old and new FDE.