The website and forum will be intermittently unavailable while we're making some security updates.
File uploads to the download hangar are also disabled until further notice.
File uploads to the download hangar are also disabled until further notice.
Army Air Corps Islanders/Defenders
Army Air Corps Islanders/Defenders
I've started working on the Britten-Norman Defenders/Islanders that the Army Air Corps have based with 651 Squadron at Aldergrove, mainly because the paints I had installed for them are absolutely ancient and no longer quite accurate. These are very much a work in progress, and I'm still very much at the 'I have no idea what I'm doing' stage when it comes to repainting things, so please forgive the obvious issues like the serials being a different height on each side of the fuselage .
According to scramble there are 9 Defenders and 3 Islanders active in total with 651. That may well be out of date info but since it seems about right I'm going with it. There are two slight variations in paint scheme-one for the three islanders (XG845, 46 and 48) as seen here:
https://www.jetphotos.com/photo/8281084
and another for the 9 Defenders (ZH001-5 and ZG995-8), as seen here:
https://www.airplane-pictures.net/photo ... ender-t-3/
So far I've only started on the one for the Islanders.
Ignore the fact the Defenders are greenish in the background-they're still using the repaint I had installed previously and I've yet to touch them. They're only there because I did the flightsim entries first and set up some quick test plans.
If and when these become good enough to release I'll upload them in the download area along with some basic flightplans.
I've got a few questions so far (more coming no doubt):
1.Does the grey look about right?
2.What font is best for the serials? Right now I'm using Segoe UI Semi-Bold, which is mostly ok, but there are some differences (eg. in the 8 and the G) between that and what the planes actually have. I can always have a stab and trying to edit said letters/numbers manually but would rather avoid it for now.
3. Does anyone know of a decent top down view of XG845, XG846 or XG848? I know there are roundels on the underside of the wings which I have yet to do but am not sure if there's anything on top yet.
According to scramble there are 9 Defenders and 3 Islanders active in total with 651. That may well be out of date info but since it seems about right I'm going with it. There are two slight variations in paint scheme-one for the three islanders (XG845, 46 and 48) as seen here:
https://www.jetphotos.com/photo/8281084
and another for the 9 Defenders (ZH001-5 and ZG995-8), as seen here:
https://www.airplane-pictures.net/photo ... ender-t-3/
So far I've only started on the one for the Islanders.
Ignore the fact the Defenders are greenish in the background-they're still using the repaint I had installed previously and I've yet to touch them. They're only there because I did the flightsim entries first and set up some quick test plans.
If and when these become good enough to release I'll upload them in the download area along with some basic flightplans.
I've got a few questions so far (more coming no doubt):
1.Does the grey look about right?
2.What font is best for the serials? Right now I'm using Segoe UI Semi-Bold, which is mostly ok, but there are some differences (eg. in the 8 and the G) between that and what the planes actually have. I can always have a stab and trying to edit said letters/numbers manually but would rather avoid it for now.
3. Does anyone know of a decent top down view of XG845, XG846 or XG848? I know there are roundels on the underside of the wings which I have yet to do but am not sure if there's anything on top yet.
Re: Army Air Corps Islanders/Defenders
For RAF/UK serials I use the RAF_PW_ATH font, or RAF_PW_ATH-gimp for Gimp users. I got it from the Simmers Paintshop website several years ago, but I don't think that site exists any more. If you can't find it on line and would like a copy PM me.
-
- Colonel
- Posts: 2162
- Joined: 06 Mar 2011, 16:48
- Version: FS9
- Location: Belgium
Re: Army Air Corps Islanders/Defenders
On AVSIM, there is a file with repaints and flightplans for rmy Air Corps BN-2 Islander (it's for HTAI model).
The file is : aac_bn2.zip
The file is : aac_bn2.zip
Re: Army Air Corps Islanders/Defenders
Thanks for the font info Delboy, will have a look around.
Yes, that's the out of date one I'm replacing.TheFoufure wrote:On AVSIM, there is a file with repaints and flightplans for rmy Air Corps BN-2 Islander (it's for HTAI model).
The file is : aac_bn2.zip
Re: Army Air Corps Islanders/Defenders
Irritating really. I remembered I had got these to 95% complete and then got caught up in studies/house moving etc. I still have them on my hard drive.
Are they still being operated? I haven't been able to find any recent info other than that they were being transferred to the RAF. Then again, their operation has always been rather hush hush.
Are they still being operated? I haven't been able to find any recent info other than that they were being transferred to the RAF. Then again, their operation has always been rather hush hush.
- Tranquil
- MAIW Developer
- Posts: 1205
- Joined: 12 Mar 2008, 23:11
- Version: MSFS
- Location: England, Merseyside
Re: Army Air Corps Islanders/Defenders
As far as im aware Britten-Norman is upgrading the former Army Air Corps Islander AL1/CC2s, which recently moved to RAF control and form part of the UK’s Intelligence, Surveillance Target Acquisition and Reconnaissance (ISTAR) fleet, i think they still fly out of Belfast Int/Aldergrove, one (ZG998) flew into Liverpool John Lennon on the 20th May 2020 still in Army scheme..
Much thanks
Mark
The spice extends life. The spice expands consciousness. The spice is vital to space travel.
Re: Army Air Corps Islanders/Defenders
Right, thanks very much Mark-that fits with all the images I've seen so far so I'll keep them in the army paint scheme.
Serial layouts now done. I suspect the smaller fittings/markings on the fuselage, especially on the defenders, will be beyond my ability, but I will at least try to make sure that the door layout is reasonable.
Serial layouts now done. I suspect the smaller fittings/markings on the fuselage, especially on the defenders, will be beyond my ability, but I will at least try to make sure that the door layout is reasonable.
Re: Army Air Corps Islanders/Defenders
I'm quite happy with how they've turned out. I had to compromise quite a bit on the defenders as the HTAI model doesn't have an extended version-only long or short nose (and of course none of the little bits poking out). As such the windows aren't placed exactly as they are in RL as the fuselage isn't long enough. I'm happy-ish with how the windows and doors have gone-the edges are a bit jagged in places but it isn't too noticeable unless you get up close.
Will pack them up with a representative flightplan and upload to the file library when I get the chance.
Re: Army Air Corps Islanders/Defenders
Now available from the download section if anyone wants them.
- Tranquil
- MAIW Developer
- Posts: 1205
- Joined: 12 Mar 2008, 23:11
- Version: MSFS
- Location: England, Merseyside
Re: Army Air Corps Islanders/Defenders
Downloaded and installed, thank you great work!
Much thanks
Mark
The spice extends life. The spice expands consciousness. The spice is vital to space travel.