The website and forum will be intermittently unavailable while we're making some security updates.
File uploads to the download hangar are also disabled until further notice.

RAFG

Post all your own Military AI projects here from days gone by.
dhazelgrove
Second Lieutenant
Second Lieutenant
Posts: 14
Joined: 19 Jan 2008, 16:06
Version: P3D

RAFG

Post by dhazelgrove »

There isn't a good AFCAD for Laarbruch (ETUL) - as it was in the 70s and 80s.

There's an AFCAD with loads of parking - but no buildings of any sort.
There's also an AFCAD of the base in 1990 - but there's no parking.

It would be a great home for Buccaneers.

Likewise, Bruggen needs four squadrons of Jaguars.

Dave
User avatar
Stewart Pearson
MAIW Staff
MAIW Staff
Posts: 3179
Joined: 11 Aug 2006, 22:11
Version: FS9
Location: Rhynd, Perthshire, Scotland
Contact:

Re: RAFG

Post by Stewart Pearson »

Dave,

I did Laarbruch Sceneries. 1 for the Tornado and and the other for the Canberra era (sans HAS).

PM me your email address and I'll send them both to you.

In fact you can download the Canberra Era from here;

http://www.militaryaiworks.com/newforum ... 52&t=12216
Stew

"There is an art … to flying. The knack lies in learning how to throw yourself at the ground and miss."
dhazelgrove
Second Lieutenant
Second Lieutenant
Posts: 14
Joined: 19 Jan 2008, 16:06
Version: P3D

Re: RAFG

Post by dhazelgrove »

Downloaded, thanks.

Dave
dhazelgrove
Second Lieutenant
Second Lieutenant
Posts: 14
Joined: 19 Jan 2008, 16:06
Version: P3D

Re: RAFG

Post by dhazelgrove »

I seem to be short a trees library.

Image

I had believed that I had all the required libraries.

Any clues?

Dave
User avatar
jimrodger
Lieutenant Colonel
Lieutenant Colonel
Posts: 1489
Joined: 22 Apr 2008, 13:34
Version: FS9
Location: EGQK (RIP)

Re: RAFG

Post by jimrodger »

I believe the library you're missing is

MAIW Czech Objects Library.bgl

Jim
"When all else fails, and your AI doesn't show up...... check the AI slider.......DOH!!!!"
plumber
Captain
Captain
Posts: 329
Joined: 12 May 2008, 11:02
Version: FS9
Location: Blackpool. UK

Re: RAFG

Post by plumber »

Dave, UKMIL has the Jaguar fleet for Bruggen if that helps.
Brian
dhazelgrove
Second Lieutenant
Second Lieutenant
Posts: 14
Joined: 19 Jan 2008, 16:06
Version: P3D

Re: RAFG

Post by dhazelgrove »

jimrodger wrote:I believe the library you're missing is

MAIW Czech Objects Library.bgl

Jim
Checked, and definitely got it. Which of the Laarbruch BGLs has the trees?

Dave
dhazelgrove
Second Lieutenant
Second Lieutenant
Posts: 14
Joined: 19 Jan 2008, 16:06
Version: P3D

Re: RAFG

Post by dhazelgrove »

plumber wrote:Dave, UKMIL has the Jaguar fleet for Bruggen if that helps.
Brian
Thanks. I'll have a look.

Dave
User avatar
jimrodger
Lieutenant Colonel
Lieutenant Colonel
Posts: 1489
Joined: 22 Apr 2008, 13:34
Version: FS9
Location: EGQK (RIP)

Re: RAFG

Post by jimrodger »

dhazelgrove wrote:
jimrodger wrote:I believe the library you're missing is

MAIW Czech Objects Library.bgl

Jim
Checked, and definitely got it. Which of the Laarbruch BGLs has the trees?

Dave
ETUL_ADE9_SP_Canberra Era_OBJ.BGL

Jim
"When all else fails, and your AI doesn't show up...... check the AI slider.......DOH!!!!"
User avatar
Stewart Pearson
MAIW Staff
MAIW Staff
Posts: 3179
Joined: 11 Aug 2006, 22:11
Version: FS9
Location: Rhynd, Perthshire, Scotland
Contact:

Re: RAFG

Post by Stewart Pearson »

Dave,

I think it might be Matts Trees Vol. IV that you're missing.

Available at Avsim;

http://library.avsim.net/esearch.php?Ca ... DLID=87290
Stew

"There is an art … to flying. The knack lies in learning how to throw yourself at the ground and miss."
User avatar
Firebird
MAIW Admin
MAIW Admin
Posts: 12112
Joined: 11 Aug 2006, 21:04
Version: FS9
Location: EGLL

Re: RAFG

Post by Firebird »

Dave, the fact that you can see the trees means that its not a bgl issue. If it was a bgl issue you would not see the trees.
The problem is that you are missing the texture for those trees. A quick check of the czech lib revealed that the texture that those tres use is TREESSU_SP.BMP.
Check to see if you have that installed, if not copy it over from the czech package that you got the lib from.
Steve
_______________________________________________________
Image
Quid Si Coelum Ruat
_______________________________________________________
dhazelgrove
Second Lieutenant
Second Lieutenant
Posts: 14
Joined: 19 Jan 2008, 16:06
Version: P3D

Re: RAFG

Post by dhazelgrove »

Firebird wrote:Dave, the fact that you can see the trees means that its not a bgl issue. If it was a bgl issue you would not see the trees.
The problem is that you are missing the texture for those trees. A quick check of the czech lib revealed that the texture that those tres use is TREESSU_SP.BMP.
Check to see if you have that installed, if not copy it over from the czech package that you got the lib from.
The problem isn't that file. I do have it all over the place, and it's in the appropriate texture folder for the calling BGL.
It's also in a few global texture folders - just to be sure.

Image

Dave
User avatar
Stewart Pearson
MAIW Staff
MAIW Staff
Posts: 3179
Joined: 11 Aug 2006, 22:11
Version: FS9
Location: Rhynd, Perthshire, Scotland
Contact:

Re: RAFG

Post by Stewart Pearson »

Dave for those large trees, I used;

Czech Objects Library 012.bgl
Czech Objects Library 019.bgl
Czech Objects Library 022.bgl


Hope this helps.
Stew

"There is an art … to flying. The knack lies in learning how to throw yourself at the ground and miss."
User avatar
timbob1
MAIW Developer
MAIW Developer
Posts: 876
Joined: 26 Nov 2009, 07:47
Version: FS9
Location: EGVG

Re: RAFG

Post by timbob1 »

Might work, I always put texture copies into the main FS9 texture folder which often sorts it out
Regards
Tim

Scenery Designer
dhazelgrove
Second Lieutenant
Second Lieutenant
Posts: 14
Joined: 19 Jan 2008, 16:06
Version: P3D

Re: RAFG

Post by dhazelgrove »

Stewart Pearson wrote:Dave for those large trees, I used;

Czech Objects Library 012.bgl
Czech Objects Library 019.bgl
Czech Objects Library 022.bgl


Hope this helps.
Aha! In the Czech airfields texture folder I found three other tree bitmaps.
I spread them around a bit and:
Image

Just right for Buccaneers and Canberras.

Thanks,
Dave
User avatar
jimrodger
Lieutenant Colonel
Lieutenant Colonel
Posts: 1489
Joined: 22 Apr 2008, 13:34
Version: FS9
Location: EGQK (RIP)

Re: RAFG

Post by jimrodger »

Firebird wrote:Dave, the fact that you can see the trees means that its not a bgl issue. If it was a bgl issue you would not see the trees.
The problem is that you are missing the texture for those trees. A quick check of the czech lib revealed that the texture that those tres use is TREESSU_SP.BMP.
Check to see if you have that installed, if not copy it over from the czech package that you got the lib from.

To try and help me understand more about this scenery stuff, how did you work out the BMP associated with the lib?

Jim
"When all else fails, and your AI doesn't show up...... check the AI slider.......DOH!!!!"
User avatar
Stewart Pearson
MAIW Staff
MAIW Staff
Posts: 3179
Joined: 11 Aug 2006, 22:11
Version: FS9
Location: Rhynd, Perthshire, Scotland
Contact:

Re: RAFG

Post by Stewart Pearson »

dhazelgrove wrote:
Aha! In the Czech airfields texture folder I found three other tree bitmaps.
I spread them around a bit and:
Image

Just right for Buccaneers and Canberras.

Thanks,
Dave
Great news Dave - hope you like the scenery. :smt006
Stew

"There is an art … to flying. The knack lies in learning how to throw yourself at the ground and miss."
User avatar
Firebird
MAIW Admin
MAIW Admin
Posts: 12112
Joined: 11 Aug 2006, 21:04
Version: FS9
Location: EGLL

Re: RAFG

Post by Firebird »

jimrodger wrote:To try and help me understand more about this scenery stuff, how did you work out the BMP associated with the lib?

Jim
There is a nifty little tool that you can use to load a bgl and then produce a report which will show all the required textures for that bgl. It's official name is ModelConverterX but will often get shortened to MCX. When you load a scenery lib you can then select the 'Object report' icon on the first line of the toolbar and it will create and save a report in html which will list all the textures required by the bgl.
Steve
_______________________________________________________
Image
Quid Si Coelum Ruat
_______________________________________________________
dhazelgrove
Second Lieutenant
Second Lieutenant
Posts: 14
Joined: 19 Jan 2008, 16:06
Version: P3D

Re: RAFG

Post by dhazelgrove »

Stewart Pearson wrote:Great news Dave - hope you like the scenery. :smt006
It's everything I could have hoped for, and will stand alongside Gutersloh, Bruggen and Wildenrath.

Thanks again.

Dave
merlin101
Major
Major
Posts: 464
Joined: 14 Sep 2006, 09:21
Version: FS9
Location: Somerset, UK

Re: RAFG

Post by merlin101 »

Great scenery! Just one query from me. I've got no revetments for the a/c parking area's, where they come from please?
Dave
Post Reply