Page 26 of 30
Re: Dans bits & bobs
Posted: 06 Apr 2025, 21:13
by jimrodger
Cheers Dan... SU-27 all sorted.
For anyone using the package in FSX, be aware that the combined FS2004/FSX CPAI F-27-200 model needs renamed from F.27 to F27 in the model.cfg and the model name. Otherwise it does not work..
Re: Dans bits & bobs
Posted: 06 Apr 2025, 21:53
by shaggy22
Thanks for that as well Jim, wouldn't have noticed that as I haven't used FSX or 2004 in a very long time. Much appreciated
Re: Dans bits & bobs
Posted: 07 Apr 2025, 18:20
by shaggy22
Re: Dans bits & bobs
Posted: 18 Apr 2025, 18:36
by shaggy22
Ghanaian Air Force package is uploaded to the hangar, please allow time for it to be made available.
As for what's next, it's something very very different. I will say the repaint run is done but I've got a lot of work to do before I can even showcase anything, stay tuned.......
Re: Dans bits & bobs
Posted: 19 Apr 2025, 07:07
by Jorgen
Dan, you're torturing us... and on purpose!
Jorgen
Re: Dans bits & bobs
Posted: 19 Apr 2025, 10:17
by John Young
Dan, if there is anything you need from me just shout.
John
Re: Dans bits & bobs
Posted: 19 Apr 2025, 11:27
by shaggy22
Jorgen wrote: 19 Apr 2025, 07:07
Dan, you're torturing us... and on purpose!
Jorgen
Yeah a little bit

Hopefully will be worth it though
Re: Dans bits & bobs
Posted: 21 Apr 2025, 11:12
by shaggy22
For this next project I could do with some help with some scenery design. If anyone here considers themselves really good at designing things from scratch on ADE & fancies helping out with this please shoot me a pm & I'll let you in on this. Goes without saying but full credit will be given as well.
Thanks in advance,
Re: Dans bits & bobs
Posted: 04 May 2025, 15:18
by shaggy22
Just uploaded a bunch of Mi-24D/V models onto the hangar, they're the same as the models I published back in November but renamed. Please delete those models if you have them installed.
Also added a whole load of repaints & fligtplans to go with them as well. There's also a paintkit included as well if you fancy a go at painting some up, please don't be afraid to share your work if you do
These are based on the Mi-35 model done by Miljan Korac with parts done by Mason Curling, the latter are also included as well so if there are any loadouts you fancy making that can be done using MCX. Thank you very much gents for helping to put all this together, it's much appreciated.
Also just to be clear, this package is not what I was hinting at in the above post either, that will come soon enough. Hopefully.
Enjoy.
Re: Dans bits & bobs
Posted: 04 May 2025, 19:29
by Jonjon
So much mistery about what's next
Many thanks for all your work and impressive packages
Fred
Re: Dans bits & bobs
Posted: 04 May 2025, 21:40
by shaggy22
Jonjon wrote: 04 May 2025, 19:29
So much mistery about what's next
Many thanks for all your work and impressive packages
Fred

Re: Dans bits & bobs
Posted: 05 May 2025, 11:33
by Joseph29
shaggy22 wrote: 04 May 2025, 15:18
Just uploaded a bunch of Mi-24D/V models onto the hangar, they're the same as the models I published back in November but renamed. Please delete those models if you have them installed.
Also added a whole load of repaints & fligtplans to go with them as well. There's also a paintkit included as well if you fancy a go at painting some up, please don't be afraid to share your work if you do
These are based on the Mi-35 model done by Miljan Korac with parts done by Mason Curling, the latter are also included as well so if there are any loadouts you fancy making that can be done using MCX. Thank you very much gents for helping to put all this together, it's much appreciated.
Also just to be clear, this package is not what I was hinting at in the above post either, that will come soon enough. Hopefully.
Enjoy.
Are these paints for this base model?
https://militaryaiworks.com/download-ha ... mi-24.html
Re: Dans bits & bobs
Posted: 05 May 2025, 12:54
by shaggy22
Yes they are, although I'd delete those particular ones as I've renamed the models for this package.
Re: Dans bits & bobs
Posted: 05 May 2025, 14:51
by Joseph29
shaggy22 wrote: 05 May 2025, 12:54
Yes they are, although I'd delete those particular ones as I've renamed the models for this package.
Thanks. I did not download that package when it first came out since there were no paints included.
Re: Dans bits & bobs
Posted: 23 May 2025, 13:19
by shaggy22
So the next small air arm that I've done is for the North-Central African country of Chad. As before this is not the big package I hinted at earlier, that is still ongoing but we're getting there.
This one is a bit of a hodgepodge with retro & modern aircraft in it. For example I've included the Su-25's & the MiG 29, very kindly done by Mason Curling, for the modern aircraft & things like the C-47's & SF260s for the retro side. The entire air force of Chad is based at N'Djamena which is not a busy airport at all so I've not done a heli overlay for it this time.
I'll also include some flightplans for some French aircraft as well for Operation Épervier with Mirage F-1s, an Atlantique & some Pumas involved for that exercise.
I'd say this is 95% done so won't be too long before this gets uploaded.
Re: Dans bits & bobs
Posted: 24 May 2025, 09:39
by Firebird
Interesting colour schemes for those Su-25s. They look nice.
Re: Dans bits & bobs
Posted: 26 May 2025, 19:37
by shaggy22
Chad stuff will be uploaded tomorrow, please allow the usual time for it to become available.
In the meantime.....

Re: Dans bits & bobs
Posted: 26 May 2025, 19:43
by tango234
I was wondering where my garden shed had gone...
Re: Dans bits & bobs
Posted: 27 May 2025, 14:16
by TheFoufure
shaggy22 wrote: 23 May 2025, 13:19
....& things like the C-47's & SF260s for the retro side.
For the SF-260, do you use the JTAI model (from John Tennent) ?
I've a developpment version of this model. It's a great model. I hope John will have a final version for this.
Re: Dans bits & bobs
Posted: 27 May 2025, 14:17
by shaggy22
TheFoufure wrote: 27 May 2025, 14:16
shaggy22 wrote: 23 May 2025, 13:19
....& things like the C-47's & SF260s for the retro side.
For the SF-260, do you use the JTAI model (from John Tennent) ?
I've a developpment version of this model. It's a great model. I hope John will have a final version for this.
That is correct