Military AI Works

Post support related comments for this package in this thread. The Package Manager will look into your problem as soon as possible.

NOTE 1: Keep this thread clean and post ONLY support related comments here. For all other discussions about this package, please reply to the release announcement.

NOTE 2: We will only provide support for bugs in our packages, not for conflicts with other addons in a user's highly modified simulator setup.

NOTE 3: Support for FSX users will not be offered in this thread. Instead FSX community support can be had from other users by posting questions in our "Unofficial Flight Simulator X Forums".

Don't know if anyone else has the same issue but the F-27 is hovering above the ground outside the golden knights hangar. I've looked but I can find no duplicate AFD files on my system. Is Pope split into 2 AFD's or could this be a problem with the aircraft CFG?



John.

The package only comes with one AFCAD for the main airfield. could be an issue with the F-27 config, have you noticed any other floating aircraft?

Just a small FYI, looks like I forgot to update the paint credits in the aircraft.cfg, paints for this package were done by Mark Heimer. It doesn't effect the package but just want to make sure credit is given where it is due.

reconmercs wrote:The package only comes with one AFCAD for the main airfield. could be an issue with the F-27 config, have you noticed any other floating aircraft?

Just noticed the DHC-6 next to the F-27 and it was sitting on the ground as per normal! Seems to be a problem with the F-27 floating only. Any thoughts?

This is the only F-27 I have so it shouldn't be a problem within my sim only

Yeah, looks to be a config issue with the F-27 then, ill see if we can get it sorted.

Some users may find white untextured squares on the aprons. If this occurs, remove the file "flood location.bgl" from the X:FS9\Addon Scenery\Pope scenery folder. This file was used for aligning the light effects and was included in the release by accident.

jaguar1 wrote:Don't know if anyone else has the same issue but the F-27 is hovering above the ground outside the golden knights hangar. I've looked but I can find no duplicate AFD files on my system. Is Pope split into 2 AFD's or could this be a problem with the aircraft CFG?



John.

I checked my F-27's and all of them are fine. None of them are floating. I did see that the nose wheel is sunk into the ground a little bit (about half the wheel). All of them are like that.

The F-27 in the Pope pack is the only one that I have so It's not because I have changed the A/C Config to fit with other textures and it's the only A/C thats floating. All the rest ate just fine........?


John.

Yeah I cannot replicate your problem with those Fokkers either, sits fine on my set up.

Mark

Mine F-27 sit fine for some minutes, then they floats...
Giorgio

John and Giorgio,

As a wee experiment I wonder if you could do the following.

Download the original model from here;

http://htai-models.com/downloads/dwai/f ... index.html

(F27A is 14th from bottom)

and then swap out the model/cfg/air files with the ones you have.

See if there is any difference to performance.

Stew, it seems to work fine.
Not yet check the air file, but here are some differencies between cfg

MAIW
[contact_points]
//Gear
point.0=1, -5.0, 0.00, -10.52, 1500, 0, 1.617, 25.0, 0.500, 2.5, 0.9, 5.0, 6.0, 0, 100, 250
point.1=1, -29.0, -12.99, -10.55, 3000, 1, 0.633, 0.0, 0.675, 2.5, 0.8, 6.0, 7.0, 2, 100, 250
point.2=1, -29.0, 12.99, -10.55, 3000, 2, 0.633, 0.0, 0.675, 2.5, 0.8, 6.0, 7.0, 3, 100, 250

static_cg_height=15.5

ORIGINAL
[contact_points]
//Gear
point.0=1, -5.0, 0.00, -10.20, 1500, 0, 1.617, 25.0, 0.500, 2.5, 0.9, 5.0, 6.0, 0, 100, 250
point.1=1, -29.0, -12.99, -10.50, 3000, 1, 0.633, 0.0, 0.675, 2.5, 0.8, 6.0, 7.0, 2, 100, 250
point.2=1, -29.0, 12.99, -10.50, 3000, 2, 0.633, 0.0, 0.675, 2.5, 0.8, 6.0, 7.0, 3, 100, 250

static_cg_height=10.5

Giorgio

Sorted out the same problem with Finnish F-27

Giorgio

Well, at least you have sorted out the problem.

As to what has caused it, why it was changed - I think I will leave that to someone who knows what the hell they are talking about.

Stewart Pearson wrote:Well, at least you have sorted out the problem.

As to what has caused it, why it was changed - I think I will leave that to someone who knows what the hell they are talking about.

static_cg_height
The static height of the aircraft when at rest on the ground (feet). The program uses this value to position the aircraft at startup, in slew, and at any other time when the simulation is not actively running.

contact_points
The vertical distance of the point from the datum reference point. (the values in red)

Giorgio

Ok so I downloaded the original DWAI F-27 file and firstly swapped out the .air file which changed nothing but then I changed the a/c config and boom!! there they were on the ramp

Thanks Stew

the end, John.

You're welcome John. No doubt there was a reason why the cfg file was amended. I don't know what that reason would be, but glad you have sorted out the VTOL F-27.