Military AI Works

Hi All

The Bulldog for the UAS and miscellaneous units is here. Please read the install instructions first. Thanks.

Units represented are:

Note EGXI is used for Finningley.

RAF
ST ATHAN STATION TAXI EGDX
6FTS Finningley EGXI

UAS
BRISTOL Hullavington EGDV
OXFORD Abingdon EGUD
CHURCH FENTON EGXG
CAMBRIDGE Teversham EGSC
WALES St Athan EGDX
LONDON Benson EGUB
YORKSHIRE Finningley EGXI
LOWLANDS Leuchars EGQL
ABERDEEN Leuchars EGQL
BIRMINGHAM Cosford EGWC
EAST MIDLANDS Cranwell EGYD
GLASGOW Glasgow EGPF
MANCHESTER Woodvale EGOW
LIVERPOOL Woodvale EGOW
NORTHUMBRIA Leeming EGXE
QUEENS Aldergrove EGAA
SOUTHAMPTON Boscombe Down EGDM

https://www.mediafire.com/?ywzhgm6l2t15en1

This is a late Christmas present to you guys prior to them being released to the public.

Enjoy

John

Thanks John.

Chris

Thanks John. Worked at Cosford when Bulldogs were there!!
Dave

Many thanks guys, this'll go nicely into my retro setup.

I did find a few altitudes missing in the FP's though when I ran it through AIFP

shaggy22 wrote:Many thanks guys, this'll go nicely into my retro setup.

I did find a few altitudes missing in the FP's though when I ran it through AIFP

Dan
It wouldnt compile if they were missing?

Gary

It depends upon the proggy used to compile. I suspect that the author didn't use AIFP. It doesn't mean that the planes won't appear or that there will be problems, it just means that the plans don't confirm to the standards applied by AIFP.

Ttools, for example, will generally compile almost anything.

Steve, Gary thanks for answering this.

Cheers

John

Dan can you Identify the Aircraft No with these errors

Gary

Just cross reference the flight plan number (eg 46) as shown in the displayed error picture above and you'll see the aircraft serial displayed (if using AIFP, that is).

Lovely package; thanks very much.

BLACKCAT wrote:Just cross reference the flight plan number (eg 46) as shown in the displayed error picture above and you'll see the aircraft serial displayed (if using AIFP, that is).

Lovely package; thanks very much.

I'm not using AIFP
And the Flightplans are not in numerical order in the Text file so not sure which these refer to.

Gary

Garysb wrote:

BLACKCAT wrote:Just cross reference the flight plan number (eg 46) as shown in the displayed error picture above and you'll see the aircraft serial displayed (if using AIFP, that is).

Lovely package; thanks very much.

I'm not using AIFP
And the Flightplans are not in numerical order in the Text file so not sure which these refer to.

Gary

Hi Guys

I think is a typo. Using AITM it shows one error.

AC#32,120,"JEAI_SA_Bulldog_LIVERPOOL-XX683"

it should be

AC#32,120,"JEAI_SA_Bulldog_LIVERPOOL-XX688"

Regards

John

OK I installed tAIFP and sorted it out
The FP height was there but it was 00

Sorted the other couple of problems out

Revised FP text and BGL files

Sorry about that, I will use AIFP to check in future

Gary

Thanks mate