Military AI Works • JYAI Merlin HC4
Page 1 of 6

JYAI Merlin HC4

Posted: 27 Apr 2021, 09:30
by John Young
This is the third and final component of the Yeovilton/Wildcat project - the addition of the Merlin HC4 (Commando) that shares the airfield with the cats. I could have used John B's Merlin HC2's, but the HC4 is radically different and I wanted to have a go at it. The model and LODs are all done for FS9 and FSX/P3D and Brian has also completed the changes to the Yeovilton scenery to accommodate the two helicopter types:

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Next job is to number up the HC4's for the two squadrons at Yeovilton and also provide an alternative doors-closed model for variety on the flight line. I also need to add the cafe buildings at the foot of the museum stairs. I should then be ready to document and assemble the packages.

John

Re: JYAI Merlin HC4

Posted: 27 Apr 2021, 10:21
by Garysb
Hi John
Are there any green ones left?


Very nice though :)

Gary

Re: JYAI Merlin HC4

Posted: 27 Apr 2021, 11:03
by Bora
Woooowww, fantastic job again on both of these...

Re: JYAI Merlin HC4

Posted: 27 Apr 2021, 11:05
by petebramley
👍👍

Re: JYAI Merlin HC4

Posted: 27 Apr 2021, 11:10
by Joseph29
Those look really nice!

Re: JYAI Merlin HC4

Posted: 27 Apr 2021, 11:26
by John Young
I think the two remaining green ones are at the manufacturers at Yeovil. I'm not going to make them - they have several different features.

John

Re: JYAI Merlin HC4

Posted: 27 Apr 2021, 13:00
by Sonarboy
Superb work John and a very welcome addition. Lovely model.

Re: JYAI Merlin HC4

Posted: 27 Apr 2021, 14:15
by MIKE JG
That's a nice looking model!

Re: JYAI Merlin HC4

Posted: 27 Apr 2021, 14:31
by Garysb
Hi John

Do they have the folding bits ?

Cheers
Gary

Re: JYAI Merlin HC4

Posted: 27 Apr 2021, 14:58
by John Young
Gary, I'm trying to finish this project, which has two brand new helicopters, for 3 sim versions, including scenery, overlays and flight plans. I really want to get away from my PC and get out and about now that lockdown has eased. No the Merlin does not have folding "bits" - that's a big increase in complexity for 5 folding blades and the boom, plus an additional drain on draw calls, especially for FSX and P3D. They do have 3 animated doors though.

John

Re: JYAI Merlin HC4

Posted: 27 Apr 2021, 15:19
by Garysb
John Young wrote: 27 Apr 2021, 14:58 Gary, I'm trying to finish this project, which has two brand new helicopters, for 3 sim versions, including scenery, overlays and flight plans. I really want to get away from my PC and get out and about now that lockdown has eased. No the Merlin does not have folding "bits" - that's a big increase in complexity for 5 folding blades and the boom, plus an additional drain on draw calls, especially for FSX and P3D. They do have 3 animated doors though.

John
John, I bow to your modelling skills and I am always grateful for anything you produce. I was maybe being a bit facetious regarding the foldy bits (is that a word)

Its a brave new world out there so stay safe, besides its nearly summer so its bound to rain anyway!

Cheers

Gary

Re: JYAI Merlin HC4

Posted: 27 Apr 2021, 16:57
by vortex471
Incredible work John, that's a huge hole in the dimming world filled thank you so much!
Is the red ring on the wildcats tail rotor staying like that?

Re: JYAI Merlin HC4

Posted: 27 Apr 2021, 17:01
by Manschy
Simply superb again!

Re: JYAI Merlin HC4

Posted: 27 Apr 2021, 17:37
by John Young
Thanks Vortex, I had to watch a video to confirm it, but I agree, the tail rotor disk ring on the Wildcat is far too bright. Easy to fix though - I just have to drop the same toned down rotor texture into each texture folder.

John

Re: JYAI Merlin HC4

Posted: 27 Apr 2021, 19:03
by bismarck
Superb, John.
In this case, I must ask...
Can we hope in more models of the Merlin?
Do you remember my question some times ago? :wink:

Giorgio

Re: JYAI Merlin HC4

Posted: 27 Apr 2021, 19:31
by vortex471
John Young wrote: 27 Apr 2021, 17:37 Thanks Vortex, I had to watch a video to confirm it, but I agree, the tail rotor disk ring on the Wildcat is far too bright. Easy to fix though - I just have to drop the same toned down rotor texture into each texture folder.

John
No problem, I can't wait to see your amazing work up close thanks again for doing them.

Re: JYAI Merlin HC4

Posted: 27 Apr 2021, 21:18
by John Young
Afraid not Giorgio, I get asked a lot of questions. I was not intending to make any other UK Marks of Merlin's since John B has already made the Royal Navy Mk2's, unless you are referring to Green retro RAF HC3's. I wasn't intending to make those either, nor do I want to get into the EH101 generally.

Sorry about that.

John

Re: JYAI Merlin HC4

Posted: 28 Apr 2021, 09:59
by bismarck
John Young wrote: 27 Apr 2021, 21:18 Afraid not Giorgio, I get asked a lot of questions. I was not intending to make any other UK Marks of Merlin's since John B has already made the Royal Navy Mk2's, unless you are referring to Green retro RAF HC3's. I wasn't intending to make those either, nor do I want to get into the EH101 generally.

Sorry about that.

John
No problem. I had to try :wink:
Giorgio

Re: JYAI Merlin HC4

Posted: 28 Apr 2021, 10:08
by John Young
I have been known to change my mind Giorgio, I just want to get the Yeovilton packages out before I think about what to do next.

John

Re: JYAI Merlin HC4

Posted: 28 Apr 2021, 11:13
by tango234
Great to see this-as far as I can tell Yeovilton was the last major (current) base in the UK that was missing all of its home traffic in the sim and having the Merlins as well is the icing on the cake.