Military AI Works

Post any and all support related comments for this package in this thread.

NOTE: Support for FSX users will not be offered in this thread. Instead FSX support can be had by posting questions in the MAIW Packages in FSX support thread located here:

http://www.militaryaiworks.com/newforum ... =15&t=6975

Guys for some reason i do not and have not ever seen the T-1's at knpa. I see the T-1's at the air force fields, but i can't figure what the problem is in penscola. I have installed the T-39 package and it does show up. By the way, i again do not and have not seen a a P-3 at knuw. I do see aircraft from other packages. Thanks for the great packages, and for any help you can offer. i am using fs9.

Did anyone every figure out why there are no T-1s at KNPA?

Thanks

I have them in my setup.

So far I have checked the flightplan, AFCAD and models and everything looks to be in order. The other T-1 in the package at DLF and END are there, so I am stumped... I'll keep digging.

I had this issue and it was related to the FP's. If you open the raw file and look at the bottom, you will notice all the NPA based "Toners" are set to 100%, not 1% like the other plans for DLF/END.

Victory103 wrote:I had this issue and it was related to the FP's. If you open the raw file and look at the bottom, you will notice all the NPA based "Toners" are set to 100%, not 1% like the other plans for DLF/END.

That did it!

Thanks much!

Thanks guys for the help, by correcting the flightplans to 1% i now have the T-1's a p'cola, thanks again!

No prob, now just confirm they are parking on the south ramp with some in the apron covers, last trip to NAS Pcola both the AETC T-1's and T-6's were in the shade.

Victory103 wrote:No prob, now just confirm they are parking on the south ramp with some in the apron covers, last trip to NAS Pcola both the AETC T-1's and T-6's were in the shade.

T-6's? Where do I find those?

Cheers

jetmax wrote:

Victory103 wrote:No prob, now just confirm they are parking on the south ramp with some in the apron covers, last trip to NAS Pcola both the AETC T-1's and T-6's were in the shade.

T-6's? Where do I find those?

Cheers

I think he is talking about the last time he flew there in RL

Oh, if that is the case I see plenty of them everyday doing touch and goes here at Kelly.

Sorry jetmax, that was real world, the T-1's shared the ramp with the t-line until all the new construction for the CSO program started. I do have a few of the non-AI D. Friswell T-6's flying around NPA in the sim.

This is the most up to date version of the NAS Pensacola AFCAD, it is also the same one included in the Pensacola Texans package.

Hi,
Need help on this. How do I change the T-1 KNAP flight plans from 100% to 1%?
Like everyone else, I have Texans ok, just don't see the T-1' s there.

You will need one of several programs that decompile traffic bgl files. TTools or AIFP3 are popular.

Thanks, I will get AIFP3.
I do read the forums carefully before shooting off a question and have found answers before. Thanks for adding the mechanics to your answer above.
Advice much appreciated.