Military AI Works

Loaded up weather based on the real KFFO metar report and it came out very nice, took these shots at dusk, just as the UT USA lights started coming on:


3 T-1 Jayhawks from 3 different bases, Vance AFB (VN), Laughlin AFB (XL) and Randolph AFB (RA)


Tinker AFB, E-3 AWACS


Need to delete this old fella from my sim.........


445th Airlift Wing's new bird (thanks to Mark for the quick paint)


Tall tails.....




Here is a quick flight plan I wrote for the new C-17:

AC#71,07-0044,50%,WEEK,IFR,1/18:14:46,TNG1/19:13:50,030,F,0044,KFFO,
3/14:33:49,TNG3/15:48:52,070,F,0044,KLCK,3/15:53:47,3/16:15:56,060,F,0044,KFFO,
5/19:09:58,TNG5/20:59:28,030,F,0044,KDAY,5/21:03:10,5/21:19:10,030,F,0044,KFFO

You will need these three airports in your Airports.txt file:

KDAY,N39* 54.14',W84* 13.16',1007
KFFO,N39* 49.49',W84* 2.79',820
KLCK,N39* 48.82',W82* 55.66',741

This has the aircraft flying IFR practice approaches at KFFO, KDAY and KLCK as the pilots get up to speed on their new aircraft.

Thanks, was trying to decide which C-5 to swap out for the C-17, but the FP helps.

It is most probably me but when i try to compile the C17 flightplans i get an error saying there is something missing at the end of the flightplan section, any ideas?

Regards Paul Day.

paul day wrote:It is most probably me but when i try to compile the C17 flightplans i get an error saying there is something missing at the end of the flightplan section, any ideas?

Regards Paul Day.

If you are using TTOOL, usually it explain well where is the problem.
If you post the flightplan, someone could give it a look....

Giorgio

paul day wrote:It is most probably me but when i try to compile the C17 flightplans i get an error saying there is something missing at the end of the flightplan section, any ideas?

Regards Paul Day.

Did you also edit the aircraft.txt file? As well as the airports.txt and the flightplans.txt

Mark

The flightpans are the ones in the first post by Mike JG above. The error is at the end of the flightpan where apparently something is missing, and i have edited the aircraft text and flightpan text.

Regards Paul Day.

When you copy the raw on screen text like that to your .txt file, pay careful attention to the commas and other small characters. Sometimes that stuff doesn't copy well.

You will have to make your own Aircraft.txt entry and make sure you change your AC# to whatever you are using.

This is what i have.

AC#1,440,"PAI_C17A_RCH_89_AS_97-0044"

[fltsim.16]
title=PAI_C17A_RCH_89_AS_97-0044
sim=PAIC17V6
model=CLOSED
texture=RCH_89_AS_97-0044
atc_airline=REACH
atc_parking_types=MIL_CARGO
atc_parking_codes=445A
ui_manufacturer=Project AI
ui_type=Boeing C-17A Globemaster III
ui_variation=USAF - 89th AS, 445th AW, Wright-Patterson AFB, Ohio. 97-0044.
description=Repaint by MH

Flightplan

AC#1,97-0044,50%,WEEK,IFR,1/18:14:46,TNG1/19:13:50,030,F,0044,KFFO,3/14:33:49,TNG3/15:48:52,070,F,0044,KLCK,3/15:53:47,3/16:15:56,060,F,0044,KFFO,
5/19:09:58,TNG5/20:59:28,030,F,0044,KDAY,5/21:03:10,5/21:19:10,030,F,0044,KFFO,

Airports

KDAY,N39* 54.14',W84* 13.16',1007
KFFO,N39* 49.49',W84* 2.79',820
KLCK,N39* 48.82',W82* 55.66',741

And when compiling i have a note saying. A parameter is missing,expecting the departure time after the last entry of the flightplan section.

Regards Paul Day.

You need to remove the comma behind the last "KFFO" in the flight plan. That comma is tricking TTools into thinking that there is more to the flight plan.

I think they still use the "RHINO" callsign for their local flights IIRC.

It's sorted, the flightplans needed to be on one continuos line. Thanks for the help.

Regards Paul Day.