The download hangar is currently disabled. We're doing our best to bring it back as soon as possible.
USAF T-1s Part 2 package by MAIW
USAF T-1s Part 2 package by MAIW
Post any and all support related comments for this package in this thread.
NOTE: Support for FSX users will not be offered in this thread. Instead FSX support can be had by posting questions in the MAIW Packages in FSX support thread located here:
http://www.militaryaiworks.com/newforum ... =15&t=6975
NOTE: Support for FSX users will not be offered in this thread. Instead FSX support can be had by posting questions in the MAIW Packages in FSX support thread located here:
http://www.militaryaiworks.com/newforum ... =15&t=6975
-Mike G.
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Re: USAF T-1s Part 2 package by MAIW
Guys for some reason i do not and have not ever seen the T-1's at knpa. I see the T-1's at the air force fields, but i can't figure what the problem is in penscola. I have installed the T-39 package and it does show up. By the way, i again do not and have not seen a a P-3 at knuw. I do see aircraft from other packages. Thanks for the great packages, and for any help you can offer. i am using fs9.
- jetmax
- Major
- Posts: 656
- Joined: 04 Nov 2006, 20:47
- Version: FS9
- Location: The Gateway to the Air Force KSKF
Re: USAF T-1s Part 2 package by MAIW
Did anyone every figure out why there are no T-1s at KNPA?
Thanks
Thanks
Re: USAF T-1s Part 2 package by MAIW
I have them in my setup.
-Mike G.
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
- jetmax
- Major
- Posts: 656
- Joined: 04 Nov 2006, 20:47
- Version: FS9
- Location: The Gateway to the Air Force KSKF
Re: USAF T-1s Part 2 package by MAIW
So far I have checked the flightplan, AFCAD and models and everything looks to be in order. The other T-1 in the package at DLF and END are there, so I am stumped... I'll keep digging.
- Victory103
- Colonel
- Posts: 3978
- Joined: 13 Aug 2007, 03:35
- Version: P3D
- Location: KPHX
Re: USAF T-1s Part 2 package by MAIW
I had this issue and it was related to the FP's. If you open the raw file and look at the bottom, you will notice all the NPA based "Toners" are set to 100%, not 1% like the other plans for DLF/END.
DUSTOFF
ARMY PROPS
NAVY SAR
-Chris
ARMY PROPS
NAVY SAR
-Chris
- jetmax
- Major
- Posts: 656
- Joined: 04 Nov 2006, 20:47
- Version: FS9
- Location: The Gateway to the Air Force KSKF
Re: USAF T-1s Part 2 package by MAIW
Victory103 wrote:I had this issue and it was related to the FP's. If you open the raw file and look at the bottom, you will notice all the NPA based "Toners" are set to 100%, not 1% like the other plans for DLF/END.
That did it!
Thanks much!
Re: USAF T-1s Part 2 package by MAIW
Thanks guys for the help, by correcting the flightplans to 1% i now have the T-1's a p'cola, thanks again!
- Victory103
- Colonel
- Posts: 3978
- Joined: 13 Aug 2007, 03:35
- Version: P3D
- Location: KPHX
Re: USAF T-1s Part 2 package by MAIW
No prob, now just confirm they are parking on the south ramp with some in the apron covers, last trip to NAS Pcola both the AETC T-1's and T-6's were in the shade.
DUSTOFF
ARMY PROPS
NAVY SAR
-Chris
ARMY PROPS
NAVY SAR
-Chris
- jetmax
- Major
- Posts: 656
- Joined: 04 Nov 2006, 20:47
- Version: FS9
- Location: The Gateway to the Air Force KSKF
Re: USAF T-1s Part 2 package by MAIW
T-6's? Where do I find those?Victory103 wrote:No prob, now just confirm they are parking on the south ramp with some in the apron covers, last trip to NAS Pcola both the AETC T-1's and T-6's were in the shade.
Cheers
-
- MAIW Veteran
- Posts: 2565
- Joined: 11 Aug 2006, 19:55
- Version: FS9
- Location: KRDU
Re: USAF T-1s Part 2 package by MAIW
I think he is talking about the last time he flew there in RLjetmax wrote:T-6's? Where do I find those?Victory103 wrote:No prob, now just confirm they are parking on the south ramp with some in the apron covers, last trip to NAS Pcola both the AETC T-1's and T-6's were in the shade.
Cheers
- jetmax
- Major
- Posts: 656
- Joined: 04 Nov 2006, 20:47
- Version: FS9
- Location: The Gateway to the Air Force KSKF
Re: USAF T-1s Part 2 package by MAIW
Oh, if that is the case I see plenty of them everyday doing touch and goes here at Kelly.
- Victory103
- Colonel
- Posts: 3978
- Joined: 13 Aug 2007, 03:35
- Version: P3D
- Location: KPHX
Re: USAF T-1s Part 2 package by MAIW
Sorry jetmax, that was real world, the T-1's shared the ramp with the t-line until all the new construction for the CSO program started. I do have a few of the non-AI D. Friswell T-6's flying around NPA in the sim.
DUSTOFF
ARMY PROPS
NAVY SAR
-Chris
ARMY PROPS
NAVY SAR
-Chris
-
- MAIW Veteran
- Posts: 2565
- Joined: 11 Aug 2006, 19:55
- Version: FS9
- Location: KRDU
Re: USAF T-1s Part 2 package by MAIW
This is the most up to date version of the NAS Pensacola AFCAD, it is also the same one included in the Pensacola Texans package.
- Attachments
-
- MAIW_AF2_KNPA_Custom.zip
- (11.78 KiB) Downloaded 70 times
-
- Cadet
- Posts: 2
- Joined: 17 Nov 2015, 20:31
- Version: FS9
Re: USAF T-1s Part 2 package by MAIW
Hi,
Need help on this. How do I change the T-1 KNAP flight plans from 100% to 1%?
Like everyone else, I have Texans ok, just don't see the T-1' s there.
Need help on this. How do I change the T-1 KNAP flight plans from 100% to 1%?
Like everyone else, I have Texans ok, just don't see the T-1' s there.
- Victory103
- Colonel
- Posts: 3978
- Joined: 13 Aug 2007, 03:35
- Version: P3D
- Location: KPHX
Re: USAF T-1s Part 2 package by MAIW
You will need one of several programs that decompile traffic bgl files. TTools or AIFP3 are popular.
DUSTOFF
ARMY PROPS
NAVY SAR
-Chris
ARMY PROPS
NAVY SAR
-Chris
-
- Cadet
- Posts: 2
- Joined: 17 Nov 2015, 20:31
- Version: FS9
Re: USAF T-1s Part 2 package by MAIW
Thanks, I will get AIFP3.
I do read the forums carefully before shooting off a question and have found answers before. Thanks for adding the mechanics to your answer above.
Advice much appreciated.
I do read the forums carefully before shooting off a question and have found answers before. Thanks for adding the mechanics to your answer above.
Advice much appreciated.