The website and forum will be intermittently unavailable while we're making some security updates.
File uploads to the download hangar are also disabled until further notice.

Holloman Talons package by MAIW

Post all questions and problems with official MAIW Packages for FS9 in this forum. Each package has a dedicated thread for support.
wktjr

Post by wktjr »

Blank Fang wrote:Please check whether you do have .Net 2.0 installed. there are 3 versions.
I have subsequentially installed 1.1, 2.0 and 3.0 on my machine. However I noticed when I had only 2.0 installed on a new Computer a particular Application did not install until I also installed 1.1. After this everything went smooth.
It seems the 3 Versions are not cumulative!
On my machine the Setup terminated OK.
I have the same issue. I have 1.1 and 2.0 installed. I thought 2.0 was just an update of 1.1 so I uninstalled 1.1. Found out something else needed it (I forget which program) so I reinstalled it. So I'm running .net 1.1, 2.0 and the latest installer.
User avatar
Savage
Captain
Captain
Posts: 287
Joined: 15 Aug 2006, 11:01
Version: FS9
Location: EGNT

Post by Savage »

Just done a manual installation and it all worked.
Garfield_x

Post by Garfield_x »

Savage wrote:When I click 'Install' and select yes to 'Install AFCAD/Scenery files' I get this error...

Image

Any ideas?
Whats listed under the detail button? That can give a clue what is wrong.

It could be some fltsim numbering. Its known that some comments after the fltsim numbers can give an error.

for instance:

[fltsim.3] //this is my own install

Please check that. It happen sometimes when people do use the installer but also use the manual method.

About the .NET framework version. Although they are numbered 1.0, 1.1, 2.0 and 3.0, they are all independent of each other. They are not updates from the other versions. So you can have 3 versions on your system installed. Some programs are written for 1.1 so they need 1.1. If you have only 2.0 installed and want to run that program you need to install 1.1 too.

The installer uses .Net 2.0. And it must be no problem if you also have 1.1 and/or 3.0 installed.
User avatar
btaylo24
MAIW Staff
MAIW Staff
Posts: 2747
Joined: 07 Sep 2006, 10:57
Version: P3D

Post by btaylo24 »

This is what I get in the details box during the installer crash.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.IO.IOException: Could not complete operation on some files and directories. See the Data property of the exception for more details.
at Microsoft.VisualBasic.FileIO.FileSystem.FxCopyOrMoveDirectory(CopyOrMove operation, String sourceDirectoryPath, String targetDirectoryPath, Boolean overwrite)
at Microsoft.VisualBasic.FileIO.FileSystem.CopyOrMoveDirectory(CopyOrMove operation, String sourceDirectoryName, String destinationDirectoryName, Boolean overwrite, UIOptionInternal showUI, UICancelOption onUserCancel)
at Microsoft.VisualBasic.MyServices.FileSystemProxy.CopyDirectory(String sourceDirectoryName, String destinationDirectoryName, Boolean overwrite)
at WOAI_Installer.frmMain.InstallPackage()
at WOAI_Installer.frmMain.btnNext_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
WOAI Installer
Assembly Version: 2.4.0.0
Win32 Version: 2.4
CodeBase: file:///C:/World%20Of%20AI/WOAI%20Installer.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
ICSharpCode.SharpZipLib
Assembly Version: 0.84.0.0
Win32 Version: 0.84.0.0
CodeBase: file:///C:/World%20Of%20AI/ICSharpCode.SharpZipLib.DLL
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
User avatar
MIKE JG
MAIW Developer
MAIW Developer
Posts: 10976
Joined: 12 Aug 2006, 02:25
Version: MSFS

Post by MIKE JG »

DOH !! :shock:
-Mike G.

Recovering flight sim addict, constant lurker.

Check out my real life RV-8 build here: RV-8 Builder Log
User avatar
Stewart Pearson
MAIW Staff
MAIW Staff
Posts: 3179
Joined: 11 Aug 2006, 22:11
Version: FS9
Location: Rhynd, Perthshire, Scotland
Contact:

Post by Stewart Pearson »

Well that's my one brain cell completely knackered :? :? :? :lol:

Cheers

Stew 8)
Stew

"There is an art … to flying. The knack lies in learning how to throw yourself at the ground and miss."
User avatar
btaylo24
MAIW Staff
MAIW Staff
Posts: 2747
Joined: 07 Sep 2006, 10:57
Version: P3D

Post by btaylo24 »

One more that what I have!
:D

Barry
Garfield_x

Post by Garfield_x »

strange error.

Looks like the installer has problem with reading/writing/copying files.
Because not everyone has this error it is even more strange.

Could be permissions, or a full HD or temp directory.
hermit

Post by hermit »

[Fltsim.0]
title=WoA_HTAI_C-12J_HT_86-0080
sim=AI Beechcraft 1900C
model=
texture=RCH_HT_586_86-0080
atc_airline=ROADRUNNER
atc_parking_types=MIL_COMBAT
atc_parking_codes=46TG
ui_manufacturer=Henry Tomkiewicz AI
ui_type=Beechcraft C-12J Huron
ui_variation=USAF - 586th FLTS, 46th TW, Holloman AFB, New Mexico. 86-0080
description=Repaint by Graham King

I did a manual install as usual and noticed this. Is the capital F in [Fltsim.0] OK? I've changed it to a small f as I'm not sure myself.

john.
User avatar
Stewart Pearson
MAIW Staff
MAIW Staff
Posts: 3179
Joined: 11 Aug 2006, 22:11
Version: FS9
Location: Rhynd, Perthshire, Scotland
Contact:

Post by Stewart Pearson »

Hi there,

Will not make any difference, although if you're checking your aircraft using something like ACA2007, then that will kick them back as an error.

Cheers

Stew 8)
Stew

"There is an art … to flying. The knack lies in learning how to throw yourself at the ground and miss."
User avatar
BadPvtDan
MAIW Staff
MAIW Staff
Posts: 3790
Joined: 11 Aug 2006, 21:14
Version: FSX
Location: Round Rock, TX
Contact:

Post by BadPvtDan »

If you use a program such as FSRenum they all need to be a little f I believe.
"The first rule of Zombieland: Cardio. When the zombie outbreak first hit, the first to go, for obvious reasons... were the fatties."
astroavion

Re: Holloman Talons package by MAIW

Post by astroavion »

Yes, the WOAI installer is pure garbage imo. I have been wrestling with this thing for years on several computers and Win operating systems and have nothing but one problem after another. I wish someone would take the zips that require using the WOAI installer and making it in line with the MAIW packages that install very easily. I have never had a problem that I recall using MAIW products.
User avatar
Firebird
MAIW Admin
MAIW Admin
Posts: 12111
Joined: 11 Aug 2006, 21:04
Version: FS9
Location: EGLL

Re: Holloman Talons package by MAIW

Post by Firebird »

It is something that I want to do and plan to do, but other things always seem to take priority.
It will get done but as yet there is no time scale.
Steve
_______________________________________________________
Image
Quid Si Coelum Ruat
_______________________________________________________
astroavion

Re: Holloman Talons package by MAIW

Post by astroavion »

Was this problem ever fixed? I just tried to install manually to a temp folder and still got this message. Is there any way someone could email me the extracted folders/files?
JohnTenn
Major
Major
Posts: 754
Joined: 12 Dec 2011, 17:16
Version: FS9

Re: Holloman Talons package by MAIW

Post by JohnTenn »

I have just downloaded this package from the library.

Unzip the 'Holloman_*_woai.zip' to a temporary folder.

Place it then in the same folder as your WOAI installer.exe.

Start the installer

Select the package to install, then locate the Holloman_*_zip.

I extracted the files to C:\unzipped.

Folder, 'Holloman * complete package' was created.

I have to extract the zip file first to get any package to install.

John
Post Reply