The website and forum will be intermittently unavailable while we're making some security updates.
File uploads to the download hangar are also disabled until further notice.
File uploads to the download hangar are also disabled until further notice.
AI S-3B Viking
Re: AI S-3B Viking
Finally, a great man is coming.
It is a happy Christmas.
Thank very much.^ ^b
It is a happy Christmas.
Thank very much.^ ^b
Happy Flight~~~
Mins
Mins
Re: AI S-3B Viking
Are you using different smoothing groups for the top and bottom of the wing parts?
-Mike G.
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
- Fokket50
- MAIW Developer
- Posts: 212
- Joined: 31 Aug 2006, 13:38
- Version: FS9
- Location: The Netherlands
Re: AI S-3B Viking
I am not familiar with smoothing groups. The top and bottom of the wing is one part, that is made smooth.
When I started the model, I had one solid wing, later I split it in half for the folding wing animations. After cutting out the flaps and making the outer wing into it's present shape, I got stuck with the shadows.
When I started the model, I had one solid wing, later I split it in half for the folding wing animations. After cutting out the flaps and making the outer wing into it's present shape, I got stuck with the shadows.
Menno
"When everything seems to be going against you, remember that the airplane takes off against the wind, not with it." -Henry Ford
"When everything seems to be going against you, remember that the airplane takes off against the wind, not with it." -Henry Ford
Re: AI S-3B Viking
You are using FSDS correct??
-Mike G.
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
- Fokket50
- MAIW Developer
- Posts: 212
- Joined: 31 Aug 2006, 13:38
- Version: FS9
- Location: The Netherlands
Re: AI S-3B Viking
That's correct
Menno
Menno
Menno
"When everything seems to be going against you, remember that the airplane takes off against the wind, not with it." -Henry Ford
"When everything seems to be going against you, remember that the airplane takes off against the wind, not with it." -Henry Ford
Re: AI S-3B Viking
Awesome. This is super easy to do and makes a HUGE difference in the look and shading of your model's parts.
Keven Reed taught me this many years ago so thank him, I'm just the messenger.
Take any part you want that is already using polygon smoothing, wings and tails are the most frequent uses for this:
Enter polygon mode (F7) and use the space bar to highlight/select each polygon that sits on the top of the wing, but only the top surface polygons, not the sides or bottom!
With all those top side polys selected, while in polygon mode select F2 to bring up the polygon properties menu:
In the menu box where it says 'smoothing group' it probably already says the number 1, change that number to a 2 and hit ok, note the difference in your part's shading:
Now do the same thing with the two polygons (if they exist) to the sides, again changing the smoothing group in the F2 properties menu to a different number than the number that is already in there. Note changing the smoothing group number to a 0 removes all polygon smoothing for only the selected polygons.
This is what the part looks like when I change the polygon smoothing group for the two endcap polys from a 1 to a 2:
A little scaling and you have a nice looking modern wing part.
Experiment with smoothing groups on all of your various smoothed parts to give you the best results. This is very effective for wings, stabilizers, flaps, vertical stabilizers, props, etc.
Keven Reed taught me this many years ago so thank him, I'm just the messenger.
Take any part you want that is already using polygon smoothing, wings and tails are the most frequent uses for this:
Enter polygon mode (F7) and use the space bar to highlight/select each polygon that sits on the top of the wing, but only the top surface polygons, not the sides or bottom!
With all those top side polys selected, while in polygon mode select F2 to bring up the polygon properties menu:
In the menu box where it says 'smoothing group' it probably already says the number 1, change that number to a 2 and hit ok, note the difference in your part's shading:
Now do the same thing with the two polygons (if they exist) to the sides, again changing the smoothing group in the F2 properties menu to a different number than the number that is already in there. Note changing the smoothing group number to a 0 removes all polygon smoothing for only the selected polygons.
This is what the part looks like when I change the polygon smoothing group for the two endcap polys from a 1 to a 2:
A little scaling and you have a nice looking modern wing part.
Experiment with smoothing groups on all of your various smoothed parts to give you the best results. This is very effective for wings, stabilizers, flaps, vertical stabilizers, props, etc.
-Mike G.
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
- Fokket50
- MAIW Developer
- Posts: 212
- Joined: 31 Aug 2006, 13:38
- Version: FS9
- Location: The Netherlands
Re: AI S-3B Viking
Thanks Mike, this solves the problem, and it is easy to use, now I only have to change 18 different models
Menno
Menno
Re: AI S-3B Viking
Glad we could help.
-Mike G.
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
- Fokket50
- MAIW Developer
- Posts: 212
- Joined: 31 Aug 2006, 13:38
- Version: FS9
- Location: The Netherlands
Re: AI S-3B Viking
Happy new year to all.
Just uploaded to the libray is the S-3 Viking with 18 different models and 58 textures.
Should be available soon.
Enjoy!
Menno
Just uploaded to the libray is the S-3 Viking with 18 different models and 58 textures.
Should be available soon.
Enjoy!
Menno
Re: AI S-3B Viking
Great news! Happy New Year Menno!
-Mike G.
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Re: AI S-3B Viking
Released and in the hangar,
http://www.militaryaiworks.com/download ... s-3-viking
Big thank you to Menno
http://www.militaryaiworks.com/download ... s-3-viking
Big thank you to Menno
Mark