The download hangar is currently disabled. We're doing our best to bring it back as soon as possible.
MCAS Iwankuni SCENERY ISSUE
-
- Cadet
- Posts: 5
- Joined: 12 Mar 2020, 19:36
- Version: FSX
MCAS Iwankuni SCENERY ISSUE
I installed two FS9 scenery packages, Iwakuni_2016_FS9_2, and Iwakuni 2018 with the following result:
As you can see, the air station ground areas are filled with sea water. I am at a lost for a solution.
As you can see, the air station ground areas are filled with sea water. I am at a lost for a solution.
- TimC340
- Lieutenant Colonel
- Posts: 1320
- Joined: 07 Mar 2015, 13:18
- Version: P3D
- Location: Hadleigh, Suffolk
- Contact:
Re: MCAS Iwankuni SCENERY ISSUE
As far as I can see, the 2018 package was a replacement for the 2016 package, not a supplement. So you should have uninstalled the 2016 version before installing the 2018 version.
-
- Cadet
- Posts: 5
- Joined: 12 Mar 2020, 19:36
- Version: FSX
Re: MCAS Iwankuni SCENERY ISSUE
Now, I uninstalled Iwakuni_2016_FS9_2, and Iwakuni 2018 and returned to the default rendering of the MCAS as shown below:
Please note the default MCAS Iwakuni with A/C nose pointed at RWY2 at N34°7.18' E132°13.82' Mag 16
Here the A/C nose pointed at RWY2 has changed to N34°7.07' E132°14.67' Mag 16.
This exercise shows something is errant in my installation of MCAS Iwakuni 2018.
Solutions please.
Please note the default MCAS Iwakuni with A/C nose pointed at RWY2 at N34°7.18' E132°13.82' Mag 16
Here the A/C nose pointed at RWY2 has changed to N34°7.07' E132°14.67' Mag 16.
This exercise shows something is errant in my installation of MCAS Iwakuni 2018.
Solutions please.
- TimC340
- Lieutenant Colonel
- Posts: 1320
- Joined: 07 Mar 2015, 13:18
- Version: P3D
- Location: Hadleigh, Suffolk
- Contact:
Re: MCAS Iwankuni SCENERY ISSUE
Ok. I'm nothing to do with this scenery package, but the default Iwakuni is the old airfield before the land reclamation was done and the new runway was built a few hundred metres further east on land which was previously sea - that's why you've moved. Whether there's something missing in this iteration of the airport I'm not sure, but I'm sure one of the guys can give you an explanation. I note you mention that you've used the FS9 package but your profile says you use FSX. Is that correct?
-
- Cadet
- Posts: 5
- Joined: 12 Mar 2020, 19:36
- Version: FSX
Re: MCAS Iwankuni SCENERY ISSUE
Interesting. I suppose filling the water sections with an appropriate apron in ADE may help. A lot of work for a released package. I have not found a support thread for this package, any other way to communicate with the authors? Finally, yes I am using FSX.TimC340 wrote: ↑16 Mar 2020, 18:18 Ok. I'm nothing to do with this scenery package, but the default Iwakuni is the old airfield before the land reclamation was done and the new runway was built a few hundred metres further east on land which was previously sea - that's why you've moved. Whether there's something missing in this iteration of the airport I'm not sure, but I'm sure one of the guys can give you an explanation. I note you mention that you've used the FS9 package but your profile says you use FSX. Is that correct?
- John Young
- MAIW Developer
- Posts: 4222
- Joined: 12 Jul 2008, 15:15
Re: MCAS Iwankuni SCENERY ISSUE
shahadiabraham wrote: ↑12 Mar 2020, 21:01 I installed two FS9 scenery packages, Iwakuni_2016_FS9_2, and Iwakuni 2018 with the following result:
The problem I think, is that you are installing an FS9 package into FSX.
To make Iwakuni 2018 compatible with FSX you need to add the updated scenery files that are in the JYAI F-35B package. This is the link:
https://militaryaiworks.com/download-ha ... -and-p3dv4
That should solve your problem.
John
-
- Cadet
- Posts: 5
- Joined: 12 Mar 2020, 19:36
- Version: FSX
Re: MCAS Iwankuni SCENERY ISSUE
Indeed, I am one happy camper. Now, to populate the air station with CAW-5 birds!John Young wrote: ↑18 Mar 2020, 15:15shahadiabraham wrote: ↑12 Mar 2020, 21:01 I installed two FS9 scenery packages, Iwakuni_2016_FS9_2, and Iwakuni 2018 with the following result:
The problem I think, is that you are installing an FS9 package into FSX.
To make Iwakuni 2018 compatible with FSX you need to add the updated scenery files that are in the JYAI F-35B package. This is the link:
https://militaryaiworks.com/download-ha ... -and-p3dv4
That should solve your problem.
John
Thank you John.
- TimC340
- Lieutenant Colonel
- Posts: 1320
- Joined: 07 Mar 2015, 13:18
- Version: P3D
- Location: Hadleigh, Suffolk
- Contact:
Re: MCAS Iwankuni SCENERY ISSUE
I modified (well, pretty much rebuilt) the MAIW Iwakuni to fit P3D's default photoreal background ayear or so ago. I still need to sort out John's harbour to make it fit! Not that I normally visit Japan in-game, but it was a fun exercise.
-
- Cadet
- Posts: 5
- Joined: 12 Mar 2020, 19:36
- Version: FSX
Re: MCAS Iwankuni SCENERY ISSUE
Very nice work Tim. You're an artist. Thank you for sharing. I got Iwakuni populated with an air wing...strapped into my C-1A trader for Atsugi to my chagrin it was almost as a ghost town, just a few birds. I imagine the CAW-5 moved to Iwakuni even in sim life as well. Thank you.
-
- Second Lieutenant
- Posts: 10
- Joined: 10 Jul 2016, 16:25
- Version: FSX
Re: MCAS Iwankuni SCENERY ISSUE
Hello, I am a long time fan of MAIW and use many of the packages from you guys. I actually currently fly out of Iwakuni, so I was trying to beef up the scenery around RJOI. I use FSX, so I started with the 2018 update and then added the necessary files from the F-35 update package. (specifically the CVX file). I am finding that the majority of the buildings are missing for some reason... and I cannot figure out why. I attached a screenshot pulled why hovering over the airfield looking NNW from the south end of RWY 2. Looking to see if anyone else had this problem or can help me out.
Small note: if you want the parking to be accurate, the CVW-5 ramp should be North to South in this order:
VAW-125
VAQ-141
VFA-102
VFA-195
VFA-27
VFA115
and The MAG-12 Ramp North to South in order:
UDP Squadron (i.e. stateside squadron on temporary deployment)
VMFA-121
VMFA-242
Small note: if you want the parking to be accurate, the CVW-5 ramp should be North to South in this order:
VAW-125
VAQ-141
VFA-102
VFA-195
VFA-27
VFA115
and The MAG-12 Ramp North to South in order:
UDP Squadron (i.e. stateside squadron on temporary deployment)
VMFA-121
VMFA-242
Matt
"FLY NAVY"
WINDOWS 10 64 BIT // INTEL CORE i7-4770T
16GB RAM // DIRECTX12
NVIDIA GEFORCE 730A
"FLY NAVY"
WINDOWS 10 64 BIT // INTEL CORE i7-4770T
16GB RAM // DIRECTX12
NVIDIA GEFORCE 730A
- TimC340
- Lieutenant Colonel
- Posts: 1320
- Joined: 07 Mar 2015, 13:18
- Version: P3D
- Location: Hadleigh, Suffolk
- Contact:
Re: MCAS Iwankuni SCENERY ISSUE
Matt, everything you need should be in the MAIW Scenery Library package. If it's not there, try adding the Atsugi and Beaufort obj packages (which I thought were in the MAIW package anyway). I don't think I added anything else to my P3Dv4 version (pics above).
-
- Second Lieutenant
- Posts: 10
- Joined: 10 Jul 2016, 16:25
- Version: FSX
Re: MCAS Iwankuni SCENERY ISSUE
So I redownloaded all those object libraries, and sure enough it worked. Maybe those files were lost or corrupted. Thanks for the help!
Matt
"FLY NAVY"
WINDOWS 10 64 BIT // INTEL CORE i7-4770T
16GB RAM // DIRECTX12
NVIDIA GEFORCE 730A
"FLY NAVY"
WINDOWS 10 64 BIT // INTEL CORE i7-4770T
16GB RAM // DIRECTX12
NVIDIA GEFORCE 730A
Re: MCAS Iwankuni SCENERY ISSUE
Tim is this P3D photoreal version mod available somewhere? I almost sat down to do something similar... glad I spotted this.
- TimC340
- Lieutenant Colonel
- Posts: 1320
- Joined: 07 Mar 2015, 13:18
- Version: P3D
- Location: Hadleigh, Suffolk
- Contact:
Re: MCAS Iwankuni SCENERY ISSUE
The Iwakuni photoreal background is included in P3Dv4 and v5 as a default feature, which is why I discovered the old MAIW version was in the wrong place. I think I lost the version that I rebuilt and is in the pictures in one or other computer SSD melt-down that I've had in the last year (there have been more than one!). I think you'll find the background under the 'Cities' folder in P3D's Scenery, but it should display by default - unless you have another third-party scenery package overlaying the area.
If I can find that AFD, I'll post it up here again. It uses all-MAIW libraries.
If I can find that AFD, I'll post it up here again. It uses all-MAIW libraries.