The website and forum will be intermittently unavailable while we're making some security updates.
File uploads to the download hangar are also disabled until further notice.

RPP_FPGen SUPPORT THREAD

Discuss anything here...nothing political or controversial please.
User avatar
kungfuman
Lieutenant Colonel
Lieutenant Colonel
Posts: 845
Joined: 01 Jun 2008, 18:21
Version: FS9
Location: EGGD

Post by kungfuman »

Then again, maybe RPP_FPGen already has these capabilities, and its just my own cack-handedness.
:roll: :? :roll:
User avatar
Firebird
MAIW Admin
MAIW Admin
Posts: 12111
Joined: 11 Aug 2006, 21:04
Version: FS9
Location: EGLL

Post by Firebird »

Guys, there is one thing about flight planning that we should take into account. Its not easy to produce quality work. This tool is designed as an aide rather than a de-facto problem solver.

Now there is one possibility that may help and either somebody else uses this method or the manual suggests this, I am not sure which.

It maybe be that it will work better if you break your flightplans down into sections, i.e. one or two planes using a few bases and 4-6 using others etc and you join up the txt files produced at the end to get your complete needs.

Try that.
Last edited by Firebird on 14 Apr 2009, 12:16, edited 1 time in total.
Steve
_______________________________________________________
Image
Quid Si Coelum Ruat
_______________________________________________________
User avatar
kungfuman
Lieutenant Colonel
Lieutenant Colonel
Posts: 845
Joined: 01 Jun 2008, 18:21
Version: FS9
Location: EGGD

Post by kungfuman »

Thanks Steve,

That is exactly what works best for me :)

Just so we're singing from the same song sheet, my comments above are certainly not meant as a complaint. They're just feedback on where a sample user (me) might like to see some future development - if any is planned, that is.

As it is, the tool is good enough that I use it - so thanks to Rip!

I also see that there is much untapped potential within its cogs and wheels. Sadly, I haven't learnt the skills to take it on, so I'm reduced to being just a critic.
User avatar
campbeme
MAIW Staff
MAIW Staff
Posts: 3293
Joined: 24 Jun 2007, 11:58
Version: FSX

Post by campbeme »

Hi all,

With Avsim down does anybody know where I can download this from please.

Mark :wink:
Mark
User avatar
btaylo24
MAIW Staff
MAIW Staff
Posts: 2747
Joined: 07 Sep 2006, 10:57
Version: P3D

Post by btaylo24 »

Hi

If you PM me your email addy I will send it to you....

BArry
User avatar
SJCarline
Second Lieutenant
Second Lieutenant
Posts: 35
Joined: 12 Apr 2009, 03:39
Version: FS9
Location: 47IL (Kempton,IL USA)
Contact:

Post by SJCarline »

me too? plz lol I want the tool as well.
32 MAIW packages in use with FSX ;)

Windows XP
intel core duo @2ghz
2gb ddr2 ram
geforce 9400gt 512mb
User avatar
shaggy22
MAIW Developer
MAIW Developer
Posts: 1580
Joined: 12 Aug 2009, 14:18
Version: P3D
Location: England, Leicester
Contact:

Re: RPP_FPGen SUPPORT THREAD

Post by shaggy22 »

I've just figured how to get aircraft to appear, however whenever they are due to go they simply vanish into thin air. At first i thought it was an afcad issue but they look okay, i then tried a different model and i'm still having the same problem. Am i doing something monumentally stupid or is it just something i've missed?? :?
Dan

"Cluster bombing from B-52s are very, very accurate. The bombs are guaranteed to always hit the ground"

Twitter: @DRAviography
Facebook: https://www.facebook.com/DanReevesAviography/
User avatar
Firebird
MAIW Admin
MAIW Admin
Posts: 12111
Joined: 11 Aug 2006, 21:04
Version: FS9
Location: EGLL

Re: RPP_FPGen SUPPORT THREAD

Post by Firebird »

Are you talking about flightplans you've made using this tool or something different instead?
Steve
_______________________________________________________
Image
Quid Si Coelum Ruat
_______________________________________________________
User avatar
shaggy22
MAIW Developer
MAIW Developer
Posts: 1580
Joined: 12 Aug 2009, 14:18
Version: P3D
Location: England, Leicester
Contact:

Re: RPP_FPGen SUPPORT THREAD

Post by shaggy22 »

yes. it just applies to aircraft that are IFR, VFR aircraft all seem to work fine
Dan

"Cluster bombing from B-52s are very, very accurate. The bombs are guaranteed to always hit the ground"

Twitter: @DRAviography
Facebook: https://www.facebook.com/DanReevesAviography/
User avatar
Firebird
MAIW Admin
MAIW Admin
Posts: 12111
Joined: 11 Aug 2006, 21:04
Version: FS9
Location: EGLL

Re: RPP_FPGen SUPPORT THREAD

Post by Firebird »

OK. If I have this correct, the plans are done and the aircraft appear at the air base but when they are due to go they disappear, without moving, from their parking spaces.
Do you have VFR traffic from that base as well?

If so, and thats OK, then zip up the raw text files, and your spreadaheet workbook and send them to me and I will try to work out if i can find an error.
It may be that you will need to send two pm's, one with the plans and one with the workbook.
Steve
_______________________________________________________
Image
Quid Si Coelum Ruat
_______________________________________________________
User avatar
shaggy22
MAIW Developer
MAIW Developer
Posts: 1580
Joined: 12 Aug 2009, 14:18
Version: P3D
Location: England, Leicester
Contact:

Re: RPP_FPGen SUPPORT THREAD

Post by shaggy22 »

Yeah thats right, and no i don't have VFR traffic from the same base. PM inbound
Dan

"Cluster bombing from B-52s are very, very accurate. The bombs are guaranteed to always hit the ground"

Twitter: @DRAviography
Facebook: https://www.facebook.com/DanReevesAviography/
User avatar
shaggy22
MAIW Developer
MAIW Developer
Posts: 1580
Joined: 12 Aug 2009, 14:18
Version: P3D
Location: England, Leicester
Contact:

Re: RPP_FPGen SUPPORT THREAD

Post by shaggy22 »

Sorry i can't send you the worksheet it says it's too big even though i've comnpressed it
Dan

"Cluster bombing from B-52s are very, very accurate. The bombs are guaranteed to always hit the ground"

Twitter: @DRAviography
Facebook: https://www.facebook.com/DanReevesAviography/
User avatar
davidbernard
Captain
Captain
Posts: 245
Joined: 26 May 2008, 14:35
Version: FS9
Location: The Netherlands

Re: RPP_FPGen SUPPORT THREAD

Post by davidbernard »

Does sound like unconnected parking spots. I've seen this happen with a 100% correct AFCAD at NAF El Centro KNJK, which is at -42 ft MSL. That seemed to be a problem.
Dave 'D-Rex' Bernard

Image
User avatar
shaggy22
MAIW Developer
MAIW Developer
Posts: 1580
Joined: 12 Aug 2009, 14:18
Version: P3D
Location: England, Leicester
Contact:

Re: RPP_FPGen SUPPORT THREAD

Post by shaggy22 »

Oh god i knew it would be something trivial like that. Thanks David and sorry Steve for wasting your time with something like that. :oops: :oops:
Dan

"Cluster bombing from B-52s are very, very accurate. The bombs are guaranteed to always hit the ground"

Twitter: @DRAviography
Facebook: https://www.facebook.com/DanReevesAviography/
User avatar
Firebird
MAIW Admin
MAIW Admin
Posts: 12111
Joined: 11 Aug 2006, 21:04
Version: FS9
Location: EGLL

Re: RPP_FPGen SUPPORT THREAD

Post by Firebird »

No problem. I will not do anything unless you confirm that you have checked the afcad and that there is no problem there.
Steve
_______________________________________________________
Image
Quid Si Coelum Ruat
_______________________________________________________
User avatar
campbeme
MAIW Staff
MAIW Staff
Posts: 3293
Joined: 24 Jun 2007, 11:58
Version: FSX

Re: RPP_FPGen SUPPORT THREAD

Post by campbeme »

Have noticed a small problem today with this very good tool. When you select to repeat a FP during generation, I have noticed that the Altitude is not repeated and is unique. Am I doing something wrong here or just found a new issue?

Mark :D
Mark
User avatar
Firebird
MAIW Admin
MAIW Admin
Posts: 12111
Joined: 11 Aug 2006, 21:04
Version: FS9
Location: EGLL

Re: RPP_FPGen SUPPORT THREAD

Post by Firebird »

How much difference is there in height. It sounds to me that it would automatically alter the height so that you would not get multiple aircraft spawning in the same space and time.
Steve
_______________________________________________________
Image
Quid Si Coelum Ruat
_______________________________________________________
RKE
Lieutenant Colonel
Lieutenant Colonel
Posts: 809
Joined: 26 Sep 2007, 21:37
Version: P3D
Location: Odense, Denmark

Re: RPP_FPGen SUPPORT THREAD

Post by RKE »

I couldn't find it elsewhere, so I figure I'd ask here: How do I go about entering GMT Offsets that are 15/30/45 minutes off the hour? Or do I just ignore it and round up or down to the nearest hour?
bslep
Cadet
Cadet
Posts: 2
Joined: 02 Aug 2013, 20:03
Version: FS9
Location: Northwest Ohio
Contact:

Re: RPP_FPGen SUPPORT THREAD

Post by bslep »

I have just recently started using RPP_FPGen, after trying to find a random flight plan generator. It is a great and easy tool to use (especially if you know a lot about excel, and read the manual)! The only problem I'm having is that whether I use AIFP, or FPGen (compiled by TrafficTools), the traffic doesn't seem to show up in the game. Yes, I compiled everything into a .bgl, and made sure it's in my FS9Folder\Scenery\World\scenery folder, and made sure that folder is activated inside the game, but whenever I get to the airport at, or just before the time of arrival\departure, none of my personal ai traffic shows up! Now all the MAIW and other FS9 addon traffic .bgls show up just fine, but for whatever reason, mine don't. Any help?

~Bryson Sleppy~
User avatar
jimrodger
Lieutenant Colonel
Lieutenant Colonel
Posts: 1489
Joined: 22 Apr 2008, 13:34
Version: FS9
Location: EGQK (RIP)

Re: RPP_FPGen SUPPORT THREAD

Post by jimrodger »

I love this prog for creating quick FPs, however, one of the small niggles I had was the produced FLs eg 074, 278 etc....

I managed to fix this by editing the macro, and the FLs are now rounded to the nearest ten eg 070, 280 etc.

You need to edit the macro and replace the line that reads

glArrCruiseAlt(j) = tmpi1
with
glArrCruiseAlt(j) = 10 * Int((tmpi1 + 5) / 10)

(search for CruiseAlt is easiest way I found)


Hope this of use to some

Jim
"When all else fails, and your AI doesn't show up...... check the AI slider.......DOH!!!!"
Post Reply