Military AI Works

sr01 wrote:KPMD will be a little while longer . I uploaded to Avsim and Flightsim yesterday . Long story short Between MS Update shutting my PC
down and a MAJOR IS3 crash some files were corrupted and 2 actually DISAF###KINGPEARED Recycled some of the files . and now re doing the VTPP files and they should be done today . After that I'll be ripping IS3 out and will re-install . THEN I'll take a break for a few daize . ADE9 has been very stable .Sbuilder more or less but IS3 is good but VERY Quarky . Sorry for the delay folks .Avsim and Flightsim were very helpful in stopping the upload .

Good luck with the setup !!
But this is the view we all can expect, a great scenery with a great aircraft

Great scenery, thanks! Slowly adding AI to it. Anyone planning FP's?
Dave

Dave
I know a couple of folk that do have some very good flightplans . I hope they'll post 'em here . Mine are basically to saturate the poor tower controller by having stuff taxi out at almost the same time for testing purposes . Glad you liked it as it's my first real attempt at scenery design . The project is as much the work of a few Beta testers without whom I'd be very much struggling to get it anywhere finished .One thing I did learn when trying to clean the place up and finalize it is , DON'T run ADE , Builder and ISIII at the same time bouncing between the three programs doesn't work and WILL cause something to crash .

I live about 10 minutes away from Plant 42 so I was very happy to see this finished and even more happy that it fits almost perfectly with MegaScenery SoCal. Thanks a ton!

KLBI wrote:I live about 10 minutes away from Plant 42 so I was very happy to see this finished and even more happy that it fits almost perfectly with MegaScenery SoCal. Thanks a ton!

Glad you like it . It's great to have some feedback ! I started ,stopped ,started ,stopped working on the modern version which has site 4 included and has a massive overhaul of site 10 . Site 1 also has very much revised parking to accomodate the B1 production . About 80 % of the needed buildings are done .I HAVE to get that Megascenery southern California addon !! . That really makes the place punch out !!

KLBI wrote:I live about 10 minutes away from Plant 42 so I was very happy to see this finished and even more happy that it fits almost perfectly with MegaScenery SoCal. Thanks a ton!

Funny! I just re-installed all my MegaSceneries and started exploring them again! Even for an old product it does look quite good. Travis looks good in NorCal too

SeanG

Hi Brian,

I fail miserably to locate this library: Tim Mayhew's tm_usaf_blackbird_support_equipment.bgl.
Can you point me to the place where this can be found, please?

gsnde wrote:Hi Brian,

I fail miserably to locate this library: Tim Mayhew's tm_usaf_blackbird_support_equipment.bgl.
Can you point me to the place where this can be found, please?

It's part of the Mildenhall installation.

Hope this helps.

Jim

Thanks for the tip, Jim. Although it does not really help. In the first package version no libraries are included. And these are the td_*.* files in my Mildenhall V2 folder:

td_birdinhand.bgl
td_fence.bgl
td_folly_copse.bgl
td_inner_fence.bgl
td_mildenhall_cargo.bgl
td_mildenhall_lib2.bgl
td_mildenhall_north_lib.bgl
td_mildenhall_trees_lib.bgl
td_objects.bgl
td_south_lights.bgl
td_trees.bgl
td_trucks.bgl
tm_airfield_extras.bgl
tm_objects.bgl
tm_raf_mildenhall_1.bgl
tm_raf_mildenhall_2.bgl
tm_rwy_mkrs.bgl
tm_usaf_equipment.bgl

I think I need to download the Mildenhall installer again - maybe it has been revised at a later point.

gsnde wrote:Thanks for the tip, Jim. Although it does not really help. In the first package version no libraries are included. And these are the td_*.* files in my Mildenhall V2 folder:

td_birdinhand.bgl
td_fence.bgl
td_folly_copse.bgl
td_inner_fence.bgl
td_mildenhall_cargo.bgl
td_mildenhall_lib2.bgl
td_mildenhall_north_lib.bgl
td_mildenhall_trees_lib.bgl
td_objects.bgl
td_south_lights.bgl
td_trees.bgl
td_trucks.bgl
tm_airfield_extras.bgl
tm_objects.bgl
tm_raf_mildenhall_1.bgl
tm_raf_mildenhall_2.bgl
tm_rwy_mkrs.bgl
tm_usaf_equipment.bgl

I think I need to download the Mildenhall installer again - maybe it has been revised at a later point.

Apologies, didn't check, just assumed!!

It's from the file
http://www.militaryaiworks.com/Straight ... R_Shed.zip

jim

Much appreciated, Jim

jimrodger wrote: ↑29 Mar 2015, 18:39

gsnde wrote:Thanks for the tip, Jim. Although it does not really help. In the first package version no libraries are included. And these are the td_*.* files in my Mildenhall V2 folder:

td_birdinhand.bgl
td_fence.bgl
td_folly_copse.bgl
td_inner_fence.bgl
td_mildenhall_cargo.bgl
td_mildenhall_lib2.bgl
td_mildenhall_north_lib.bgl
td_mildenhall_trees_lib.bgl
td_objects.bgl
td_south_lights.bgl
td_trees.bgl
td_trucks.bgl
tm_airfield_extras.bgl
tm_objects.bgl
tm_raf_mildenhall_1.bgl
tm_raf_mildenhall_2.bgl
tm_rwy_mkrs.bgl
tm_usaf_equipment.bgl

I think I need to download the Mildenhall installer again - maybe it has been revised at a later point.

Apologies, didn't check, just assumed!!

It's from the file
http://www.militaryaiworks.com/Straight ... R_Shed.zip

jim

Just wondering is this file still in the library? Link appears to be broken.... Thanks

I think this is what you're looking for.

https://1drv.ms/u/s!Am2Fnz2wsOPB83Bq-Jm ... O?e=PGZnXv

Jim

Thank you!!!