Military AI Works

Yeah Stew, you and your arrows. I was going to talk to you about my roof but got sidetracked with the cfg. I suppose you've been wearing that green suit too.

Chris

Plus your under pants on the outside .lol
mw

That's me guys.............................Robin Superman - by day, ace reporter for the Sherwood Globe.

but do you have to play with little john..

MW

... also there is no way he made Marion.

Firebird wrote:... also there is no way he made Marion.

Made Marion do what?

f47420 wrote:but do you have to play with little john..

MW

It's the only exercise I get.

mikewmac wrote: Eventually I might create my own personal AI FDE for your outstanding JYAI F-111 to use with textures for the F/B-111A's based at the old Plattsburgh AFB, if and when they become available from some motivated painter. Years ago I used to fly over Plattsburgh AFB on my way to Clinton County Airport from Burlington when the F/B-111A's were based there. They were an awesome sight from directly above at 3000 feet.

Well if your patient there may be the 380th BMW and 509th BMW in your future. Especially if a true A model stratrobladder made an appearance (if not the E will work just fine)

I've opened a thread in the FDE section at FsDeveloper to see if anyone can suggest why the FDE worked for some people but not for others using the same aircraft, traffic file and scenery/AFCAD. It was always rock stable on my system. Although the actual reports of the bounce problem was only from a handful of people in about 800 downloads, it's still an unwanted complication for the future, particularly when I can't replicate the problem and deal with it by experimentation. More testing will obviously help, but I still might not include a problematic installation in the sample. I Need to move on though.

Because of the interest in the F-111 here and all the help you have given me, I'd like to offer the FB-111A model and perhaps a couple of paints. What I need though is a good 3-view drawing to work from, a photograph or two of the wanted livery and the required load-out. I have searched the net, but I can't find what I am looking for. If anyone can e-mail me these bits, I'll gladly do it after I have finished the wing glove correction for the existing aircraft.

John

John

What a lovely gesture. You are to be commended Sir, for your models and for your generosity.

Chris

This thread shows exemplary why this is one of the few really nice places in the net.

gsnde wrote:This thread shows exemplary why this is one of the few really nice places in the net.

Agree

Superb, John.
I am hoping that somebody has the 3 view drawings that you need. The nice thing about doing the FB-111A is that you get the F-111G for free. Also if you add the longer wings to the existing pave tack model then you get the F-111C which would enable a retro RAAF fleet to be done.

Firebird wrote:Superb, John.
I am hoping that somebody has the 3 view drawings that you need. The nice thing about doing the FB-111A is that you get the F-111G for free. Also if you add the longer wings to the existing pave tack model then you get the F-111C which would enable a retro RAAF fleet to be done.

Good old Steve......................never accepts an inch, when he can ask for a mile!!!

(sorry mate couldn't resist)

John Young wrote:Because of the interest in the F-111 here and all the help you have given me, I'd like to offer the FB-111A model and perhaps a couple of paints. What I need though is a good 3-view drawing to work from, a photograph or two of the wanted livery and the required load-out. I have searched the net, but I can't find what I am looking for. If anyone can e-mail me these bits, I'll gladly do it after I have finished the wing glove correction for the existing aircraft.

John

John,

Below is a link to the FB-111A.net website that is loaded with information, photos, etc. for the FB-111A:

http://www.fb-111a.net/index.html

Below is a link to information and nose art photos for the FB-111A's flown by the 380th Bombardment Wing (Medium) based at Plattsburgh AFB, NY from 7-1-1972 to 7-10-1991 found on this website:

http://www.fb-111a.net/nosearts.html

Below is a link to a 3-View Drawing of the FB-111A with dimensions found on this same website:

http://www.fb-111a.net/OJT/OJT1-20.jpg

Below is a link to a table of the dimensions of the FB-111A found on this same website:

http://www.fb-111a.net/OJT/OJT1-21.jpg

Although the 3-view drawing and table are not of the highest quality, I hope you will find this website helpful in developing a JYAI FA-111A for the 380th Bombardment Wing.

If I can help by developing a JYAI FA-111A FDE for it please let me know, but if you prefer to create the AI FDE yourself, I will certainly understand. If there is anything else I can do to help, please let me know.

Thanks,

LEBTowerGuy wrote:

mikewmac wrote: Eventually I might create my own personal AI FDE for your outstanding JYAI F-111 to use with textures for the F/B-111A's based at the old Plattsburgh AFB, if and when they become available from some motivated painter. Years ago I used to fly over Plattsburgh AFB on my way to Clinton County Airport from Burlington when the F/B-111A's were based there. They were an awesome sight from directly above at 3000 feet.

Well if your patient there may be the 380th BMW and 509th BMW in your future. Especially if a true A model stratrobladder made an appearance (if not the E will work just fine)

Matt,

It looks like there just may be a JYAI FB-111A in our future.

Stewart Pearson wrote:Good old Steve......................never accepts an inch, when he can ask for a mile!!!

(sorry mate couldn't resist)

No problem, Stew. Especially with the c**p I give you.

I should point out though that it was not a request, I was merely pointing out an opportunity that John may not be immediately aware off. Whether he goes there or not is entirely up to him.

John Young wrote: Because of the interest in the F-111 here and all the help you have given me, I'd like to offer the FB-111A model and perhaps a couple of paints. What I need though is a good 3-view drawing to work from, a photograph or two of the wanted livery and the required load-out. I have searched the net, but I can't find what I am looking for. If anyone can e-mail me these bits, I'll gladly do it after I have finished the wing glove correction for the existing aircraft.

John

John, just sent you a PM. Hopefully that will have the info you need.

John
FB-111A 3 views are in the mail ( sent to your email address) Load out requests and detail info etc. will be in the mail tonight ( Busy with SHMBO'd commands for the afternoon ) .
BTW , I was 95 % done with some 111E's disguised as SAC FB111A's .
Cheers
Brian

Thanks guys, I'm on the case. I haven't studied the C-model yet but I had a feeling that if I extended the wings, added the intake ramps from the Raven and the Pave Tack from the F model, I might get quite close. I'll check it out. I really don't mind people requesting things when they can be done with marginal effort.