Page 2 of 2
Re: Anybody willing to paint this?
Posted: 23 May 2011, 17:07
by ardethomas
No effects added and using FS9.
Re: Anybody willing to paint this?
Posted: 23 May 2011, 18:00
by Graham King
2 things to try.
1. Backup your current aircraft.cfg by saving it as aircraft.txt. Download aircraft model and reinstall it. You can then copy all the fltsim.x entries from the backup EXCEPT the ones for the problem textures.
2. Use the same flight plans but different aircraft textures, download one if required.
3. If it is still working then re-install the problem textures, preferably from the original download and if you have that then copy the fltsim.x entries from there as well.
4. If it crashes after all the above upload a copy of your aircraft.cfg
Re: Anybody willing to paint this?
Posted: 23 May 2011, 18:39
by james84
No problem to report.
Re: Anybody willing to paint this?
Posted: 23 May 2011, 18:45
by Alan Robertson
No problem here either.
Re: Anybody willing to paint this?
Posted: 23 May 2011, 18:45
by f4nutter
mine went straight in too ?
Re: Anybody willing to paint this?
Posted: 23 May 2011, 20:13
by ardethomas
I will get back to you after I try Graham's fix.
Thank you!!!
Re: Anybody willing to paint this?
Posted: 23 May 2011, 21:09
by Firebird
I have a question. Which flightplans did you use and did you compile them yourself or use the compiled bgl if it was Giorgio's?
The reason I ask is that when i compiled mine I noticed that was an extra '//' at the end of the plan for MM62228. This possibly might be causing problems and it would explain why it was ok if removed the bgl.
Re: Anybody willing to paint this?
Posted: 23 May 2011, 21:42
by Firebird
OK just checked it and no problem at my end.
Re: Anybody willing to paint this?
Posted: 24 May 2011, 02:52
by ardethomas
I am using Giorgio's FP, I corrected the extra // and recompiled.
I did everything Graham asked without succes, here is the aircraft.cfg as requested.
Re: Anybody willing to paint this?
Posted: 24 May 2011, 04:42
by Graham King
OK, everything looks alright from the pont of the view of the aircraft. Next will be to check the scenery, probably an AFCAD problem. Not my area of expertise so I will let somebody explain what to do next.
Re: Anybody willing to paint this?
Posted: 24 May 2011, 07:07
by Firebird
Can you confirm that you are setting the same time, day and location with and without the bgl? Also can you confirm that the crash happens on startup, or is it sometime afterwards?
If it is on startup what percentage through startup does it happen.
Re: Anybody willing to paint this?
Posted: 24 May 2011, 18:26
by ardethomas
Success!!
I did the following:
1. I checked for duplicate AFCADS = none. (I use lire2006_v1.zip by Enzo Calcagni, available at AVSIM)
2. I substituted the ELVIS KC707 AMI tankers I had, for the KC767 using the KC707 FP I had.
Apparently, my system doesnt like Giorgio's FP, I dont know why.
Thanks for all the help you gave me!!!
Re: Anybody willing to paint this?
Posted: 24 May 2011, 18:51
by bismarck
I use the same scenery for LIRE, very strange...
Giorgio