Page 2 of 3

Posted: 31 Aug 2008, 06:36
by btaylo24
Guys

Why dont u use Rips FP tool on AVSIM. It would make all this so easy for y all

http://library.avsim.net/esearch.php?Ca ... LID=120354

Barry

Posted: 31 Aug 2008, 14:57
by Flyin Illini
If i'm not mistaken, I see a couple problems in your flight plan. First is that u didn't change the days over to the next day after 00:00 time. I notice this on the 1st to 2nd day and 3rd to 4th day. Second is u have two 15min flights on the 4th and 5th days which the next leg starts 5 min before the 15min legs end.
But i thought the flight plans are on GMT time? So if that is the case then 00:00 is 7PM here on CDt which means its still the same day. The two minute flight are what i call RON, where i start my aircraft at its home port, fly to a airport, stay there over night, then fly home the next day, i made this work by doing the 15 minute flights, although i do see the cause for concern, i should make them long so the airplane doesnt confuse itself. Thanks for the help and ideas guys.

Posted: 31 Aug 2008, 15:20
by SMOC
Flyin Illini wrote:But i thought the flight plans are on GMT time? So if that is the case then 00:00 is 7PM here on CDt which means its still the same day. The two minute flight are what i call RON, where i start my aircraft at its home port, fly to a airport, stay there over night, then fly home the next day, i made this work by doing the 15 minute flights, although i do see the cause for concern, i should make them long so the airplane doesnt confuse itself. Thanks for the help and ideas guys.
They are in GMT but it still goes to the next day. Day 2 in GMT is still day 1 in local time(in this case) but you still have to go to the next day when you write the plans.

Posted: 31 Aug 2008, 16:11
by Flyin Illini
Ok to make sure i understand this, say i start a flight at 1/23:45, i have to go to say 2/01:45 to make sure the flight is correct. So no matter what, it must go to the next day no matter when it reaches 00:00? So does flight sim realize this and make sure it is still monday when the flightplan says its tuesday>

Posted: 31 Aug 2008, 16:48
by SMOC
Flyin Illini wrote:Ok to make sure i understand this, say i start a flight at 1/23:45, i have to go to say 2/01:45 to make sure the flight is correct. So no matter what, it must go to the next day no matter when it reaches 00:00? So does flight sim realize this and make sure it is still monday when the flightplan says its tuesday>
Yes, once you past 23:59GMT you must roll over to the next day. The game will understand it's the next day but when checking you(the user) should use local time to determine if the aircraft is showing up.

Using your example, if you went to 2/01:42 at Scott AFB to watch this aircraft land, you wouldn't see that aircraft. Because the game would convert it to local time but on day two instead of day 1. You would have to pick day one and the local time to watch it landing. It works like it should in terms of understanding the plans, the problem is the game doesn't adjust the times properly when you manually select a time when you are actually in the game. Make sense?

Posted: 31 Aug 2008, 18:14
by Flyin Illini
Ok good i understand that now, makes sense. Hopefully i can get working on this again, now i have to redo all my flight plans. I use AI flight planner to do my non tng flight plans. Is it good or bad? Ive heard both things, i dont understand rips tool yet.

Posted: 03 Sep 2008, 23:54
by JohnStinstrom
Hey guys, sorry I can't help with the AI but I have a request of those going to the airshow. I would hope to do a scenery for Scott at some time in the future so, if you are the picture-taking kind, so any photos of the base would be appreciated. Google is good for the building shapes but unless you've been there yourself you never know anything about the vertical dimensions. Shots showing the hangars and flightline buildings are obviousl gold for us scenery designers.

Posted: 25 Nov 2008, 18:58
by Flyin Illini
Hey now that i got all my AI problems fixed im going to get back to work on this. I figured last time i made them way to difficult or tried to do that by creating overnight stays but i figured out how to do that a easier way. I also re-did the afcad from google maps to see where all the real parking was. So its a accurate afcad. Here is a quick shot.

Image

Posted: 26 Nov 2008, 04:49
by Flyin Illini
KC-135 Stratotankers coming in now...126th ARW...there will be 11 of them. 26 Aircraft in total will be based there.

10 C-21's
11 KC-135's
2 C-9C's
2 C-40's

Image


Hey i got a question to, if i make a flight plan to the same airport from the same airport. And i change the eta to say 4 hours later, will the aircraft just fly around randomly for that time?

Posted: 26 Nov 2008, 05:33
by BadPvtDan
Nope. It will do a 15 minute circuit.

Posted: 26 Nov 2008, 22:40
by Flyin Illini
I hit a roadblock again...this time with TNG's...

6/22:00,TNG0/02:00,50,F,30,KBLV,0/02:04,0/02:19,50,F,30,KBLV

Does that look right? I havent put it in yet, it looked like this before it.

6/22:00,TNG0/02:00,50,F,30,KBLV

Posted: 26 Nov 2008, 22:47
by BadPvtDan
When you compile that and decompile it...you can see that it will have changed to a 15 minute TNG methinks.

Posted: 28 Nov 2008, 00:26
by Flyin Illini
well its finally done...flight plans are not 100% accurate but they are all bases they visit and spend time at or do pattern work at so its exetremely close.

Here is three shots of all the aircraft based there including some random transients that were in the pics.

Image
Image
Image

Once i get this all figured out putting a package together, it will be availble for upload.

Posted: 29 Nov 2008, 05:02
by Flyin Illini
*removed* by me

Posted: 29 Nov 2008, 21:00
by Jumpshot724
Awesome!!

I also downloaded some scenery for Scott off of AVSIm, coupled with all your hard work this base is now alive and well!!

Good Job, keep it up!! :D 8)

Scott AFB

Posted: 29 Nov 2008, 23:32
by starlifterfan
Job well done ,I have some scenery for Scott AFB that I had downloaded awhile ago forgot from who but it was from Avsim,got rid of the AFCAD that came with the scenery and replaced it with yours...incredible results...even had some USMC harriers on the ramp...Great job!!!!!

scott afb

Posted: 30 Nov 2008, 18:59
by kenn0218
I'm new to these forums and am impressed with the packages, however I can't download the scott afb package from avsim, anywhere else that I can download it from? thanks in advance

Posted: 30 Nov 2008, 19:02
by Flyin Illini
No there were some issues in the package of my own fault, it will be redone to pass ceritifications for everyone. So give me a few days to make sure everything checks out. For those who know, i apologize again.

Posted: 30 Nov 2008, 21:48
by siuav8r
I was wondering if anyone would do a Scott package. I live off the approach end of 14R in Shiloh. Thanks for putting this together!

Posted: 01 Dec 2008, 01:03
by Javier Tapia
Hi,
guys, does anyone knows where could i get the tail numbers of the aircraft at Scott?

Thanks!