Page 1 of 1
how to alter an AI aircraft's configuration file, etc.
Posted: 06 Nov 2010, 18:21
by renee
Can anyone tell me if there is more than one place in the (aircraft cfg or air file) to alter the static_pitch = 0 static_cg_height =0
Thanks
James
Re: how to alter an AI aircraft's configuration file, etc.
Posted: 06 Nov 2010, 20:47
by MIKE JG
Not that I know of.
Re: how to alter an AI aircraft's configuration file, etc.
Posted: 06 Nov 2010, 21:22
by mikewmac
renee wrote:Can anyone tell me if there is more than one place in the (aircraft cfg or air file) to alter the static_pitch = 0 static_cg_height =0
Thanks
James
James,
The static pitch and static cg height settings in the aircraft.cfg file only control the pitch and cg height of an AI when you first start FS9 and it remains in pause mode. As soon as you unpause FS9 the cg height is controlled by the x,y and z coordinates set in the parameter "empty_weight_CG_position" and the AI's pitch on the ground is controlled by the landing gear dimensions in the AI model and the x,y and z coordinates for the AI's contact points needed to have the tires in proper contact with the ground.
Mike
Re: how to alter an AI aircraft's configuration file, etc.
Posted: 07 Nov 2010, 20:29
by renee
Got it! Thanks Mike.
James