Removal of Redundant ATC

[tg13]

Is it possible to stop ATC calls from redundant RAF stations in FS9,IE Cottesmore,Lyneham,Kinloss,Coltishall.Also when i'm on the ground at Coningsby...just one example do i hear calls for take off from Church Fenton or Ternhill..most bizzare.

[Stewart Pearson]

Is it possible to stop ATC calls from redundant RAF stations in FS9,IE Cottesmore,Lyneham,Kinloss,Coltishall.Also when i'm on the ground at Coningsby...just one example do i hear calls for take off from Church Fenton or Ternhill..most bizzare.

No need to delete anything.

Open up the afcad for Ch. Fenton or whatever and select list/comm frequencies. If you currently have 123.45 as the ground freq, try changing it to 123.5 or anything that suits.

It is difficult in the UK with so many airfields close together and only a restricted amount of frequencies.

Unfortunately, FS9 didn't include UHF/Military frequency ranges.

[tg13]

Cheers Stew,so by doing what you said will that elminate the calls from redundant airfields or the calls from other stations for take off,etc??

[Stewart Pearson]

Cheers Stew,so by doing what you said will that elminate the calls from redundant airfields or the calls from other stations for take off,etc??

If you have a particular airport that is getting transmissions from other bases, then hopefully that will help. Of course you may need to try changing a few times until you get a frequency that is not being used.