F-111E/F and EF111A (JY)

Post all your own Military AI projects here from days gone by.
LEBTowerGuy

Re: F-111E/F and EF111A (JY)

Post by LEBTowerGuy »

I already started working on a "Dark Vark" scheme for the current models for the 380th and 509th.
User avatar
Firebird
MAIW Admin
MAIW Admin
Posts: 12379
Joined: 11 Aug 2006, 21:04
Version: FS9
Location: EGLL

Re: F-111E/F and EF111A (JY)

Post by Firebird »

It might be worth holding off on that, Matt, until John looks at whether he will do the FB-111 version or not. The reason being that the FB/G is 2 feet longer so you may well find that the paintkit needs modding.
Steve
_______________________________________________________
Image
Quid Si Coelum Ruat
_______________________________________________________
LEBTowerGuy

Re: F-111E/F and EF111A (JY)

Post by LEBTowerGuy »

true that...I have compiled all of the nose art and associated serials though...will hold for now.
User avatar
John Young
MAIW Developer
MAIW Developer
Posts: 4444
Joined: 12 Jul 2008, 15:15

Re: F-111E/F and EF111A (JY)

Post by John Young »

I think Steve is right, I will need to re-work the layout of the texture sheet for the FB/G and re-do some of the mapping. The longer wing span is not an issue but the added 2ft on the fuselage might be complicated if it disturbs any of the animation. I'll certainly give that a go and I never give up easily, especially now that I have been sent some fantastic reference information. I'm just finishing off the the correction to the right wing root glove. That looked very straightforward to do, but in fact it turned into a right pig. I've managed it though without disturbing any of the other mapping so the "E" and "F" repaints that have been done will still register completely.

Give me a few days and I'll let you know how I am getting on.

John
User avatar
sr01
Major
Major
Posts: 633
Joined: 17 Nov 2009, 01:49
Version: FS9

Re: F-111E/F and EF111A (JY)

Post by sr01 »

LEBTowerGuy wrote:I already started working on a "Dark Vark" scheme for the current models for the 380th and 509th.
Matt
I've also done the early SAC FB's for both YPG and PSM
User avatar
sr01
Major
Major
Posts: 633
Joined: 17 Nov 2009, 01:49
Version: FS9

Re: F-111E/F and EF111A (JY)

Post by sr01 »

John Young wrote:I think Steve is right, I will need to re-work the layout of the texture sheet for the FB/G and re-do some of the mapping. The longer wing span is not an issue but the added 2ft on the fuselage might be complicated if it disturbs any of the animation. I'll certainly give that a go and I never give up easily, especially now that I have been sent some fantastic reference information. I'm just finishing off the the correction to the right wing root glove. That looked very straightforward to do, but in fact it turned into a right pig. I've managed it though without disturbing any of the other mapping so the "E" and "F" repaints that have been done will still register completely.

Give me a few days and I'll let you know how I am getting on.

John
John
ALL AF F-111's were EXACTLY the same length !!! The C and the FB had the 2 ft extra wingspan
User avatar
John Young
MAIW Developer
MAIW Developer
Posts: 4444
Joined: 12 Jul 2008, 15:15

Re: F-111E/F and EF111A (JY)

Post by John Young »

Thanks for that. I knew about the extra wingspan, but I read Steve's post wrongly as meaning the fuselage length. I would have discovered the true dimensions in any case once I had studied the documentation I now have.

John
User avatar
Firebird
MAIW Admin
MAIW Admin
Posts: 12379
Joined: 11 Aug 2006, 21:04
Version: FS9
Location: EGLL

Re: F-111E/F and EF111A (JY)

Post by Firebird »

Having started the confusion I thought that I had better help sort it out.
I knew that the FB-111A was longer but when I looked into it it appears that the first test FB-111 had a 2 foot longer pitot tube which is what caused the somewhat well known confusion. The fuselage length is the same length as the other versions.

The wingspan of the FB/G/C is 7 feet longer.

Hopefully it is all clear now.
Steve
_______________________________________________________
Image
Quid Si Coelum Ruat
_______________________________________________________
User avatar
sr01
Major
Major
Posts: 633
Joined: 17 Nov 2009, 01:49
Version: FS9

Re: F-111E/F and EF111A (JY)

Post by sr01 »

Firebird wrote:Having started the confusion I thought that I had better help sort it out.
I knew that the FB-111A was longer but when I looked into it it appears that the first test FB-111 had a 2 foot longer pitot tube which is what caused the somewhat well known confusion. The fuselage length is the same length as the other versions.

The wingspan of the FB/G/C is 7 feet longer.

Hopefully it is all clear now.
7 FEET !! That must have been a requirement to get the heavier Australian crew airborne :smt004
HOWEVER, it must have been wishfull thinking , as the "C" model had the same wingspan as the FB-111A .You can see this in any Australian F-111C pic's where the wings are fully swept back .
User avatar
Firebird
MAIW Admin
MAIW Admin
Posts: 12379
Joined: 11 Aug 2006, 21:04
Version: FS9
Location: EGLL

Re: F-111E/F and EF111A (JY)

Post by Firebird »

Yeah I know the longer wings are 70' spread and 33' 11" swept whilst the default models have 63' spread and 32' swept.

The longer wings were developed for the USN, F-111B, which were also chosen by the RAF, F-111K, RAAF and SAC.

Apologies for any initial confusion.

As a side issue what I found really bizarre was that the extra wing pylons for the FB-111 were non-swinging. As I understand it if they were loaded then the wings had to be swept forward until the load and pylons were jettisoned.

If this is true then fully loaded it had to have been a real dragmaster.
Steve
_______________________________________________________
Image
Quid Si Coelum Ruat
_______________________________________________________
User avatar
John Young
MAIW Developer
MAIW Developer
Posts: 4444
Joined: 12 Jul 2008, 15:15

Re: F-111E/F and EF111A (JY)

Post by John Young »

I've spent a few hours today just studying the FB-111A, especially the photographic links that Mike M posted. I'm Ok with the modelling I think, particularly after the really useful information and 3-view that Brian sent me. it's actually the painting that's still a bit hazy. The older SAC camo scheme appeals to me, but I guess most people will want the darker and less contrasty later scheme. I might do both. I've found one diagram for the camo pattern but's it's not good quality and it's hard to follow - in fact it's so bad, I'm not sure which one it is yet. I'm also trying to find out what the colours are called (old scheme and later scheme) and their RGB values.

Most of the pictures I have seen, seem to suggest a 2 or 4 drop tank load-out, or other wise just unloaded pylons. I can do those but I'd like to do one model with something a bit more exotic. Not sure what yet.

John
Chrisb
Major
Major
Posts: 553
Joined: 18 Aug 2006, 07:34
Version: FS9
Location: UK

Re: F-111E/F and EF111A (JY)

Post by Chrisb »

John

'something a bit more exotic'

What about one of those hats with the fruit and flowers on. Didn't carburandum wear one?

Chris
mikewmac
MAIW Veteran
MAIW Veteran
Posts: 1787
Joined: 12 Aug 2006, 10:06
Version: P3D
Location: KBTV - Vermont

Re: F-111E/F and EF111A (JY)

Post by mikewmac »

I read a post on John's thread at FS Developer hypothesizing that the bouncing and smoking experienced by some users with the original JYAI F-111 might be caused by the lower FS9 FPS experienced on older PC's.

My original tests on Monday where I saw absolutely no sign of any bounce or smoke with the original JYAI F-111 were all done on a new, very fast PC workstation that I recently built, so I decided to repeat the tests on my older, much slower PC workstation at the same FS9 airbase to test this hypothesis. I intentionally set AI traffic density high to keep the FPS down and sure enough I observed a large amount of the bouncing and smoking, especially on takeoff and landing. When I reduced the AI traffic density and the FPS went up, the bouncing and smoking diminished. This result seems to support the hypothesis that some of us never observed the bouncing and smoking by the JYAI F-111 because of the speed and relatively high FS9 FPS generated by our newer PC's.

Now that I can observe the bouncing and smoking, I am going to study this problem more thoroughly. At the very least I now will be doing a final test on all my AI FDE's developed on my new PC, on my older PC in order to assure that this problem is not present. :wink:
    Mike M.
    User avatar
    delbydoo
    Colonel
    Colonel
    Posts: 1889
    Joined: 11 Aug 2006, 19:24
    Version: FS9

    Re: F-111E/F and EF111A (JY)

    Post by delbydoo »

    Clockwork PC's (like mine) :roll:
    Stewart Pearson
    MAIW Veteran
    MAIW Veteran
    Posts: 3179
    Joined: 11 Aug 2006, 22:11
    Version: FS9
    Location: Rhynd, Perthshire, Scotland
    Contact:

    Re: F-111E/F and EF111A (JY)

    Post by Stewart Pearson »

    Upper Heyford scenery now released;

    http://www.militaryaiworks.com/newforum ... 66#p128366
    Stew

    "There is an art … to flying. The knack lies in learning how to throw yourself at the ground and miss."
    User avatar
    bismarck
    MAIW Developer
    MAIW Developer
    Posts: 2377
    Joined: 04 Jan 2007, 14:35
    Version: FS9
    Location: Milan,Italy

    Re: F-111E/F and EF111A (JY)

    Post by bismarck »

    mikewmac wrote: I intentionally set AI traffic density high to keep the FPS down and sure enough I observed a large amount of the bouncing and smoking, especially on takeoff and landing. When I reduced the AI traffic density and the FPS went up, the bouncing and smoking diminished. This result seems to support the hypothesis that some of us never observed the bouncing and smoking by the JYAI F-111 because of the speed and relatively high FS9 FPS generated by our newer PC's.

    Mike, at least for me, this is absolutely not the cause of the bouncing problem. As I wrote before I had the same behaviour at any airport, including my test airport where there are just the aircraft. (ok....also the runway... :D )

    Giorgio
    Image
    mikewmac
    MAIW Veteran
    MAIW Veteran
    Posts: 1787
    Joined: 12 Aug 2006, 10:06
    Version: P3D
    Location: KBTV - Vermont

    Re: F-111E/F and EF111A (JY)

    Post by mikewmac »

    bismarck wrote:
    mikewmac wrote: I intentionally set AI traffic density high to keep the FPS down and sure enough I observed a large amount of the bouncing and smoking, especially on takeoff and landing. When I reduced the AI traffic density and the FPS went up, the bouncing and smoking diminished. This result seems to support the hypothesis that some of us never observed the bouncing and smoking by the JYAI F-111 because of the speed and relatively high FS9 FPS generated by our newer PC's.

    Mike, at least for me, this is absolutely not the cause of the bouncing problem. As I wrote before I had the same behaviour at any airport, including my test airport where there are just the aircraft. (ok....also the runway... :D )

    Giorgio
    Giorgio,

    Hmmmm, that's interesting. What were the FS9 FPS when you saw the JYAI F-111 bounce and smoke?
      Mike M.
      User avatar
      MrJollyroger103
      Second Lieutenant
      Second Lieutenant
      Posts: 44
      Joined: 25 Mar 2012, 18:13
      Version: FSX

      Re: F-111E/F and EF111A (JY)

      Post by MrJollyroger103 »

      Ray- For you LN Varks. Could you tell me what serial numbers go with what units, as i am trying to put callsigns for each of the correct varks. I dont normally guess on callsigns since i know most of them today but i didnt grow up with the vark but callsigns used for the 493rd-Yellow tail band was ?slam or nail?, 492nd-Blue tail band is ?Bolar? and 494th-Red tail band is paws(as i heard in a video on youtube).
      User avatar
      f4nutter
      MAIW Developer
      MAIW Developer
      Posts: 2221
      Joined: 01 Nov 2007, 16:00
      Version: P3D
      Location: EGDC
      Contact:

      Re: F-111E/F and EF111A (JY)

      Post by f4nutter »

      to be honest i dont know ? i got my serials and colours from Airliners and http://flickrhivemind.net/Tags/f111f :shock:
      User avatar
      bismarck
      MAIW Developer
      MAIW Developer
      Posts: 2377
      Joined: 04 Jan 2007, 14:35
      Version: FS9
      Location: Milan,Italy

      Re: F-111E/F and EF111A (JY)

      Post by bismarck »

      Mike I can't remember exactly, when the aircraft were parked the FPS was at 20 for sure (blocked at 20 in my setup).
      Can't remember where it was when it started to bounce.

      Giorgio
      Image
      Post Reply