Agusta Westland Wildcat
- John Young
- MAIW Developer
- Posts: 4235
- Joined: 12 Jul 2008, 15:15
Re: Agusta Westland Wildcat
Thanks Hartwig. I have e-mailed Brian and he will look at his files again later this evening.
It's just possible I uploaded a previous version of Brian's placement file that we knew had the duplication problem, after I had checked everything was OK with a replacement one. Now that you have confirmed the problem, it should be an easy fix.
John
It's just possible I uploaded a previous version of Brian's placement file that we knew had the duplication problem, after I had checked everything was OK with a replacement one. Now that you have confirmed the problem, it should be an easy fix.
John
- Jobza Guddun
- Second Lieutenant
- Posts: 65
- Joined: 04 Feb 2008, 18:21
- Version: FS9
- Location: UK
Re: Agusta Westland Wildcat
Thanks to everyone involved for this. Great work and really appreciated.
- Fokket50
- MAIW Developer
- Posts: 212
- Joined: 31 Aug 2006, 13:38
- Version: FS9
- Location: The Netherlands
Re: Agusta Westland Wildcat
Thank you John, for another great project. A special thank you for still including FS9 models.
Menno
"When everything seems to be going against you, remember that the airplane takes off against the wind, not with it." -Henry Ford
"When everything seems to be going against you, remember that the airplane takes off against the wind, not with it." -Henry Ford
- John Young
- MAIW Developer
- Posts: 4235
- Joined: 12 Jul 2008, 15:15
Re: Agusta Westland Wildcat
Thanks for your kind comments. I think Brian has solved the problem of the duplicate custom buildings in Yeovilton in FS9, at least they appear to have for me. I'm going to send the files to Hartwig next so hopefully he can verify the same. I'll then post them for everyone if that's all OK.
John
John
- John Young
- MAIW Developer
- Posts: 4235
- Joined: 12 Jul 2008, 15:15
Re: Agusta Westland Wildcat
My thanks to Brian for removing the duplicate custom buildings at Yeovilton (FS9) and to Hartwig for testing them. All is now good and in the attached zip are two replacement scenery files.
That was a really unusual problem and one that had tied Brian and I in knots for quite a while. What seemed like a simple solution of deleting the duplicates was far from it - Brian just couldn't see the objects to delete in his ADE files. However after much trial and error and a few recompiles, the duplicates disappeared. We don't know why, but we are pleased it's fixed.
I will ask Steve if he would kindly swap the files in the uploaded zip, so that users downloading after that will not need the fix.
John and Brian
That was a really unusual problem and one that had tied Brian and I in knots for quite a while. What seemed like a simple solution of deleting the duplicates was far from it - Brian just couldn't see the objects to delete in his ADE files. However after much trial and error and a few recompiles, the duplicates disappeared. We don't know why, but we are pleased it's fixed.
I will ask Steve if he would kindly swap the files in the uploaded zip, so that users downloading after that will not need the fix.
John and Brian
- Attachments
-
- Yeovilton_Fs9_replacement BC files.zip
- (34.56 KiB) Downloaded 46 times
Re: Agusta Westland Wildcat
I have replaced the files in the original package so anybody that reads this before they download will not have to worry about the replacement files.
Steve
_______________________________________________________
Quid Si Coelum Ruat
_______________________________________________________
_______________________________________________________
Quid Si Coelum Ruat
_______________________________________________________
Re: Agusta Westland Wildcat
Hi,
first of all thank you to John and his team for this beautiful package.
Really a masterpiece, again.
I have a small issue: in the Yeovilton scenery ( FSX) I always have these four black buildings.
I suppose it is a texture problem: I've installed two times all the libraries but nothing has changed.
Does anybody have an idea how to fix it ?
Many thanks lucame
first of all thank you to John and his team for this beautiful package.
Really a masterpiece, again.
I have a small issue: in the Yeovilton scenery ( FSX) I always have these four black buildings.
I suppose it is a texture problem: I've installed two times all the libraries but nothing has changed.
Does anybody have an idea how to fix it ?
Many thanks lucame
- John Young
- MAIW Developer
- Posts: 4235
- Joined: 12 Jul 2008, 15:15
Re: Agusta Westland Wildcat
I think it is a missing library texture. Unfortunately, it's not an easy task to determine which one it is because the library needs to be identified first. I think Brian may be able to help because he would have placed the object. I'll drop him an e-mail for you and ask the question.
John
John
Re: Agusta Westland Wildcat
This is the Doc in Brian's original scenery which specifies the libs he used.
- Attachments
-
- LIBRARTY OBJECTS USED FOR RNAS YEOVILTON.zip
- (11.09 KiB) Downloaded 33 times
Steve
_______________________________________________________
Quid Si Coelum Ruat
_______________________________________________________
_______________________________________________________
Quid Si Coelum Ruat
_______________________________________________________
Re: Agusta Westland Wildcat
Thank you John and Steve for your answers.
I'll give a look to the libs and wait for Brian's suggestions.
Ciao lucame
I'll give a look to the libs and wait for Brian's suggestions.
Ciao lucame
- John Young
- MAIW Developer
- Posts: 4235
- Joined: 12 Jul 2008, 15:15
Re: Agusta Westland Wildcat
Brian did come back to me, but the textures were not the ones needed. I have asked him to check again.
John
John
- John Young
- MAIW Developer
- Posts: 4235
- Joined: 12 Jul 2008, 15:15
Re: Agusta Westland Wildcat
The problem of the "missing textures" in Brian's Yeovilton, when used in FSX, is solved.
In fact, the textures were not missing at all. They are the "MAIW_EGNB_Bits.bmp" and "LM" files in the Yeovilton scenery folder. However, the file that has the objects in them "maiw_egnb_library_FS9.bgl" doesn't work in FSX. I have tried running it through MCX to convert it for that sim, but still it produces blank textures.
Brian's solution is to replace those objects with similar ones from the MAIW ABO library, which is included in the MAIW FSX Global Object Libraries.
Replace Brian's two scenery files with the ones in the attached zip and that should give you the textured buildings.
John
In fact, the textures were not missing at all. They are the "MAIW_EGNB_Bits.bmp" and "LM" files in the Yeovilton scenery folder. However, the file that has the objects in them "maiw_egnb_library_FS9.bgl" doesn't work in FSX. I have tried running it through MCX to convert it for that sim, but still it produces blank textures.
Brian's solution is to replace those objects with similar ones from the MAIW ABO library, which is included in the MAIW FSX Global Object Libraries.
Replace Brian's two scenery files with the ones in the attached zip and that should give you the textured buildings.
John
- Attachments
-
- Yeovilton_FSX_replacement files.zip
- (34.9 KiB) Downloaded 46 times
Re: Agusta Westland Wildcat
Hi John,
a big thank you to Brian and to you for the replacement files.
Now every building is okay and the scenery is gorgeous !
Ciao lucame
a big thank you to Brian and to you for the replacement files.
Now every building is okay and the scenery is gorgeous !
Ciao lucame
-
- First Lieutenant
- Posts: 181
- Joined: 16 May 2012, 18:11
- Version: FS9
- Location: Seville, Spain
Re: Agusta Westland Wildcat
Many thanks for your compliments Lucame. So pleased you are enjoying the scenery. John Young, a big thanks to him found the real problem why the textures would not show in FSX. The easy part was just to swap those that did not work with the MAIW ABO Global scenery bgl's and textures that did. Johns Wildcats and Merlin's for me are the icing on the cake. The detail in his modelling is just phenomenal.
Re: Agusta Westland Wildcat
Gents,I already have the Yeovilton/Merryfield scenery installed in my Fs9 set up,
do I have to remove anything from the 2018 install or do the new files simply overwrite
what's required?
Also do I need to remove my current Merlin F/P's or just put in the new ones?
The package looks fabulous.
I've been looking for the Navy Wings ramp and the FAA museum to fly the Skysim Sea Vixen out of.
Many thanks.
do I have to remove anything from the 2018 install or do the new files simply overwrite
what's required?
Also do I need to remove my current Merlin F/P's or just put in the new ones?
The package looks fabulous.
I've been looking for the Navy Wings ramp and the FAA museum to fly the Skysim Sea Vixen out of.
Many thanks.
- John Young
- MAIW Developer
- Posts: 4235
- Joined: 12 Jul 2008, 15:15
Re: Agusta Westland Wildcat
You do not need the 2018 Yeovilton package - please uninstall it. Everything you need is in the Wildcat one, including the flight plans. You will though need the MAIW Global Object Libraries and the additional third party libraries listed in the manual.
John
John
Re: Agusta Westland Wildcat
Thanks for that John