FSDS Modeling Tutorial Series: A Basic Hangar Model
FSDS Modeling Tutorial Series: A Basic Hangar Model
This is the first video tutorial where we actually model a structure. In this case a very basic hangar with open doors and an interior. This lesson will not focus on texturing this model, only constructing it. We will cover the texturing of this model in the next tutorial.
This lesson uses tips and techniques learned in the "FSDS Basics" series and builds on that knowledge.
This video is approximately 26 minutes long.
https://militaryaiworks.com/academy/fsd ... ngar-model
Please post any questions or comments you may have about this tutorial in this thread.
This lesson uses tips and techniques learned in the "FSDS Basics" series and builds on that knowledge.
This video is approximately 26 minutes long.
https://militaryaiworks.com/academy/fsd ... ngar-model
Please post any questions or comments you may have about this tutorial in this thread.
-Mike G.
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Re: FSDS Scenery Modeling: A Basic Hangar Model
Also as a favor to me, can you please post a quick note to let me know if you are actually using/watching these tutorials.
So far the feedback has been practically nil. If this continues, I will not continue to produce these tutorials as it is not worth my time and efforts.
So far the feedback has been practically nil. If this continues, I will not continue to produce these tutorials as it is not worth my time and efforts.
-Mike G.
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Re: FSDS Scenery Modeling: A Basic Hangar Model
Mike, speaking for myself, your tutorial stuff is fantabulous
I haven't commented on any of the previous ones (although I should have, my apologies ). I don't have FSDS yet, but will get it soon. Let me just tell you that even without the software, your tutorials have made me feel like I'll be able to jump right in, Well done!
I'm sure my first attempts will be simple (everything starts at the beginning) but I think you've made it as easy as possible to get started, many thanks!
I haven't commented on any of the previous ones (although I should have, my apologies ). I don't have FSDS yet, but will get it soon. Let me just tell you that even without the software, your tutorials have made me feel like I'll be able to jump right in, Well done!
I'm sure my first attempts will be simple (everything starts at the beginning) but I think you've made it as easy as possible to get started, many thanks!
Re: FSDS Scenery Modeling: A Basic Hangar Model
Please................ keep the tutorials going. We may be silent, but we are appreciative.
Thank you.
Thank you.
Re: FSDS Scenery Modeling: A Basic Hangar Model
wasn't sure when to begin feedback. waiting for first learning project. assumed it would be like home work assignment sort of thing. Have enjoyed the lessons so far, other than high praise for each, they don't really offer much excuse for feed back. Like being in the class room paying attention to the instructor, taking notes etc. So how will you want feed back on this? Pic of results, copy of the model file to you to review? Maybe the answer is in the current lesson which has just finished d/l so I'm off to unzip and watch. ta ta for now
Re: FSDS Scenery Modeling: A Basic Hangar Model
Ron I just need to know if anyone is actually utilizing the lessons, which appears that you guys are.
-Mike G.
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Re: FSDS Scenery Modeling: A Basic Hangar Model
Normally, I start reading the various posts from top to bottom, but when I seen that there is a new post in the lessons thread, I go there first, and start the d/l. I will unzip and transfer to preferred folder and then sit back and watch before doing much of anything else. I'm sure there are lots of happy viewers out there, but lately I had been worrying about no feed back causing you to abandon the project. Please don't. Ron
Re: FSDS Scenery Modeling: A Basic Hangar Model
No worries, even if only a couple people are using them, that's worth it to me. I'll try to get the next lesson done today.
-Mike G.
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Re: FSDS Scenery Modeling: A Basic Hangar Model
As been slow going with other commitments, but am working through them. Great work. Has helped alot in understanding the FSDS program and design.
Before this had dabbled with it, but now going much easier.
Thanks for your hard work,
Before this had dabbled with it, but now going much easier.
Thanks for your hard work,
Rick
"Buttons . . . check. Dials . . . check. Switches . . . check. Little colored lights . . . check."
"Buttons . . . check. Dials . . . check. Switches . . . check. Little colored lights . . . check."
Re: FSDS Scenery Modeling: A Basic Hangar Model
Mike,
I must admit to hoarding these like a frickin' squirrel for the time that I will actually be able to try these rather than watch them.
Roll on the return of shift work! Days is frickin' killing me!
I must admit to hoarding these like a frickin' squirrel for the time that I will actually be able to try these rather than watch them.
Roll on the return of shift work! Days is frickin' killing me!
Steve
_______________________________________________________
Quid Si Coelum Ruat
_______________________________________________________
_______________________________________________________
Quid Si Coelum Ruat
_______________________________________________________
Re: FSDS Scenery Modeling: A Basic Hangar Model
even if only a couple people are using them, that's worth it to me
Very good news, and thanks very much.... Ron
Very good news, and thanks very much.... Ron
- BadPvtDan
- MAIW Staff
- Posts: 3790
- Joined: 11 Aug 2006, 21:14
- Version: FSX
- Location: Round Rock, TX
- Contact:
Re: FSDS Scenery Modeling: A Basic Hangar Model
Bloody hell...making interiors was easier than I ever imagined. I always shied away from doing too many because I have always created single polys to recreate the insides. Man...I suck. Great job, Mike.
"The first rule of Zombieland: Cardio. When the zombie outbreak first hit, the first to go, for obvious reasons... were the fatties."
- nickblack423
- MAIW Veteran
- Posts: 2155
- Joined: 11 Aug 2006, 21:43
- Version: FS9
- Location: Ipswich, UK
- Contact:
Re: FSDS Scenery Modeling: A Basic Hangar Model
HEHE I was exactly the same when I saw Mike use "Snap to Scale" I couldn't believe I'd never used that before.BadPvtDan wrote:Bloody hell...making interiors was easier than I ever imagined. I always shied away from doing too many because I have always created single polys to recreate the insides. Man...I suck. Great job, Mike.
Nice One Mike these tutorials have been amazing and very worthwhile.
Nick
Re: FSDS Scenery Modeling: A Basic Hangar Model
Downloaded Basic 2 last night. Reminded me of uses I had forgotten like pressing the "C" to center plus others. So I downloaded Basic 1.
Don't get discouraged. One reason you may not hear from people is because of the easy simple clear way you describe things!! Look forward to more tutorials.
Don't get discouraged. One reason you may not hear from people is because of the easy simple clear way you describe things!! Look forward to more tutorials.
Re: FSDS Modeling Tutorial Series: A Basic Hangar Model
Mike
Superb video, really easy to follow. I even understood it!
Thanks for doing these, will be a benefit for years.
Superb video, really easy to follow. I even understood it!
Thanks for doing these, will be a benefit for years.
Barry
Re: FSDS Modeling Tutorial Series: A Basic Hangar Model
Glad you liked it. Still want to do more but as you know, other projects are taking my time these days, really enjoy doing the aircraft modeling right now. Scenery has suddenly become boring to me....
-Mike G.
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Re: FSDS Modeling Tutorial Series: A Basic Hangar Model
Mike
A ton of thank's for doing these tutorials .They's been an enormous help ! I my case I followed along using my hanger version and when stuck or f##ked things up went back to the appropriate tutorial . GOLDEN RULE #1 =back up with a working version OFTEN !!
Brian
A ton of thank's for doing these tutorials .They's been an enormous help ! I my case I followed along using my hanger version and when stuck or f##ked things up went back to the appropriate tutorial . GOLDEN RULE #1 =back up with a working version OFTEN !!
Brian
Re: FSDS Modeling Tutorial Series: A Basic Hangar Model
Another tip is to back up using a file naming system that allows you to go back one or two versions in case you really muck something up.
When doing AI models, I usually start with something like "RC135U_A.fsc" and by the time the model is finished, the name is usually something like "RC135U_PP" having gone all the way through the alphabet and starting with double lettering.
I will usually keep about 5 versions prior to the current one just in case. It has saved me on numerous occasions.
The other thing you have to be careful with FSDS is using the back button to undo your work. If you are working on a project, say you just loaded it up made a few changes, then didn't like the changes you made, used the back button to undo what you just did, eventually you'll get to a blank screen with no model present. If you have accidentally saved that file or the autosave feature was active and it saved that blank file, you just lost all of your work. Just like that.
After that happened a few times, I went to the backup system with the lettering which has worked very well.
When doing AI models, I usually start with something like "RC135U_A.fsc" and by the time the model is finished, the name is usually something like "RC135U_PP" having gone all the way through the alphabet and starting with double lettering.
I will usually keep about 5 versions prior to the current one just in case. It has saved me on numerous occasions.
The other thing you have to be careful with FSDS is using the back button to undo your work. If you are working on a project, say you just loaded it up made a few changes, then didn't like the changes you made, used the back button to undo what you just did, eventually you'll get to a blank screen with no model present. If you have accidentally saved that file or the autosave feature was active and it saved that blank file, you just lost all of your work. Just like that.
After that happened a few times, I went to the backup system with the lettering which has worked very well.
-Mike G.
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Re: FSDS Modeling Tutorial Series: A Basic Hangar Model
Hi
Hope all of you are well?
I am a newbie here and been following the Basic Hangar video
I need some help please
I followed the video till 6m30sec,then i get stuck
When i select my points to make the hangers side walls for the doors,when i move it,it movies my rooftop en not the walls
Hope its clear in which section i require some assistance
If any one can assist,it will gladly be appreciated
Greetings from South Africa
Hope all of you are well?
I am a newbie here and been following the Basic Hangar video
I need some help please
I followed the video till 6m30sec,then i get stuck
When i select my points to make the hangers side walls for the doors,when i move it,it movies my rooftop en not the walls
Hope its clear in which section i require some assistance
If any one can assist,it will gladly be appreciated
Greetings from South Africa
Re: FSDS Modeling Tutorial Series: A Basic Hangar Model
Norchie
Welcome.
You need to select the first box. Then copy it. Work then with the copy of the box.
Or you could make a new box from scratch.
I have not used FSDS in a while, but the idea is to select a new part before trying to manipulate it.
Use all the tutorials you can to get a better understanding of how the program works.
Remember most tutorials are made by people who have been using the program for a long time and take the basic steps for granted.
Persevere, it will be worth it in the long run.
John
Welcome.
You need to select the first box. Then copy it. Work then with the copy of the box.
Or you could make a new box from scratch.
I have not used FSDS in a while, but the idea is to select a new part before trying to manipulate it.
Use all the tutorials you can to get a better understanding of how the program works.
Remember most tutorials are made by people who have been using the program for a long time and take the basic steps for granted.
Persevere, it will be worth it in the long run.
John