Forums
Global Ai Caribou
- nigelf
- Second Lieutenant

- Posts: 48
- Joined: 18 Jul 2007, 04:22
- Version: FS9
- Location: YMMB Australia
Global Ai Caribou
Just wondering if anyone can shed a little light. I have the above installed and looks very good,
However when it taxi's the wheel chocks stay in place and it uses turboprop engines.
Is there something missing in the model file or is that how it is supposed to be??
However when it taxi's the wheel chocks stay in place and it uses turboprop engines.
Is there something missing in the model file or is that how it is supposed to be??
- Firebird
- MAIW Admin

- Posts: 12411
- Joined: 11 Aug 2006, 21:04
- Version: FS9
- Location: EGLL
Re: Global Ai Caribou
Are you using this for AI or flyable?
Steve
_______________________________________________________

Quid Si Coelum Ruat
Chelsea FC - World Champions
_______________________________________________________
_______________________________________________________

Quid Si Coelum Ruat
Chelsea FC - World Champions
_______________________________________________________
- nigelf
- Second Lieutenant

- Posts: 48
- Joined: 18 Jul 2007, 04:22
- Version: FS9
- Location: YMMB Australia
Re: Global Ai Caribou
Ai only
- Firebird
- MAIW Admin

- Posts: 12411
- Joined: 11 Aug 2006, 21:04
- Version: FS9
- Location: EGLL
Re: Global Ai Caribou
Strange, I don't get the chocks issue at all. Can you confirm that you use FS9?
The turboprop entry is of no significance to the AI interface, in this particular case. It was purely what the FDE was built from rather than being accurate.
The turboprop entry is of no significance to the AI interface, in this particular case. It was purely what the FDE was built from rather than being accurate.
Steve
_______________________________________________________

Quid Si Coelum Ruat
Chelsea FC - World Champions
_______________________________________________________
_______________________________________________________

Quid Si Coelum Ruat
Chelsea FC - World Champions
_______________________________________________________
- nigelf
- Second Lieutenant

- Posts: 48
- Joined: 18 Jul 2007, 04:22
- Version: FS9
- Location: YMMB Australia
Re: Global Ai Caribou
Yes I am using FS9. I have changed the air file to prop and changed engine details to reflect piston engine. That works fine but the wheel chocks travel with the moving aircraft.
I will use the original air file and see if that resolves the issue, though I don't think this
has any bearing on what fs9 displays.
Perhaps my FDE is corrupt. I will also reinstall the formentioned with a new copy to
see if this resolves the issue.
I will use the original air file and see if that resolves the issue, though I don't think this
has any bearing on what fs9 displays.
Perhaps my FDE is corrupt. I will also reinstall the formentioned with a new copy to
see if this resolves the issue.
- Firebird
- MAIW Admin

- Posts: 12411
- Joined: 11 Aug 2006, 21:04
- Version: FS9
- Location: EGLL
Re: Global Ai Caribou
I would agree that altering the fde should not cause that, but stranger things have happened. It maybe that the mdl got corrupted.
Steve
_______________________________________________________

Quid Si Coelum Ruat
Chelsea FC - World Champions
_______________________________________________________
_______________________________________________________

Quid Si Coelum Ruat
Chelsea FC - World Champions
_______________________________________________________
- campbeme
- MAIW Staff

- Posts: 3294
- Joined: 24 Jun 2007, 11:58
- Version: FSX
Re: Global Ai Caribou
I'd replace the aircraft.cfg if I was you. Sounds to me like a trigger for the chocks to disappear is not working. (example a nav light or something)
mark
mark
Mark
- Dark Morelia
- Captain

- Posts: 248
- Joined: 15 Feb 2007, 04:02
- Version: FS9
- Location: Hervey Bay, Australia
- Contact:
Re: Global Ai Caribou
Changing it to prop is what did it.
FS9 AI use lights differently depending on what their engine type is set to, recips will not turn on nav lights during the day, which is what the chock appearance is tied to, if I recall.
FS9 AI use lights differently depending on what their engine type is set to, recips will not turn on nav lights during the day, which is what the chock appearance is tied to, if I recall.
- Firebird
- MAIW Admin

- Posts: 12411
- Joined: 11 Aug 2006, 21:04
- Version: FS9
- Location: EGLL
Re: Global Ai Caribou
Well there you go, you learn something new everyday.
Steve
_______________________________________________________

Quid Si Coelum Ruat
Chelsea FC - World Champions
_______________________________________________________
_______________________________________________________

Quid Si Coelum Ruat
Chelsea FC - World Champions
_______________________________________________________
- nigelf
- Second Lieutenant

- Posts: 48
- Joined: 18 Jul 2007, 04:22
- Version: FS9
- Location: YMMB Australia
Re: Global Ai Caribou
Is there a way that I can change that? I really don't like the sond of the turbop[rop for the Caribou.
Perhaps link chocks and door with beacon?
I use FSHotSFX With modified caribou souns that sound good.
Perhaps link chocks and door with beacon?
I use FSHotSFX With modified caribou souns that sound good.
- Firebird
- MAIW Admin

- Posts: 12411
- Joined: 11 Aug 2006, 21:04
- Version: FS9
- Location: EGLL
Re: Global Ai Caribou
I believe that would necessitate altering and recompiling the model.
Steve
_______________________________________________________

Quid Si Coelum Ruat
Chelsea FC - World Champions
_______________________________________________________
_______________________________________________________

Quid Si Coelum Ruat
Chelsea FC - World Champions
_______________________________________________________
- Dark Morelia
- Captain

- Posts: 248
- Joined: 15 Feb 2007, 04:02
- Version: FS9
- Location: Hervey Bay, Australia
- Contact:
Re: Global Ai Caribou
Nope, linking them to beacons or engines would mean that the chocks will be visible during pushback.
Anyhow, if you're using FSHotSFX with custom sounds, what difference does it make what the engine type is set to?
Anyhow, if you're using FSHotSFX with custom sounds, what difference does it make what the engine type is set to?
- nigelf
- Second Lieutenant

- Posts: 48
- Joined: 18 Jul 2007, 04:22
- Version: FS9
- Location: YMMB Australia
Re: Global Ai Caribou
It does not quite sit right. Caribous traditioally are not turbo prop.
Sounds strange as FSHotefex only comes in at take off not during taxi.
Great model though, just wish there were maore repaints avilable.
Sounds strange as FSHotefex only comes in at take off not during taxi.
Great model though, just wish there were maore repaints avilable.
-
TheFoufure
- Colonel

- Posts: 2523
- Joined: 06 Mar 2011, 16:48
- Version: FS9
- Location: Belgium
Re: Global Ai Caribou
Hello,
I'm searching yellow RCAF repaint for this aircraft. I"ve searched but never find.
I just find spanish and RAAF repaints.
If someone have RCAF repaints I'm interested.
Thanks a lot.
Regards
I'm searching yellow RCAF repaint for this aircraft. I"ve searched but never find.
I just find spanish and RAAF repaints.
If someone have RCAF repaints I'm interested.
Thanks a lot.
Regards
-
md11driver44
- Captain

- Posts: 240
- Joined: 18 Sep 2015, 04:03
- Version: FSX
- Location: Texas
Re: Global Ai Caribou
Back in 1969 my father worked out on Kwajalein with the Defense Missile project. He worked up in the island of Meck and flew on the Caribou. I don't remember much of what the rides were like, but I know my time on Kwaj was fun.
Robert P. Armstrong Ret.
Latest Posts
Help MAIW with your donation
Today, 12:17 by Greg
IP Blocked Due To Suspicious Activity?
Today, 08:51 by John Young
Australian JYAI AW139 Repaints
Today, 06:42 by mixie1997
Coming soon!
Yesterday, 22:20 by Jim
PDAI Lockheed TriStar
Yesterday, 18:51 by shaggy22
Latest Files
Repaint Lockheed Martin F-35A Lightning II - Belgium AF-(JYAI) V.1.0
2026-07-07
Repaint AgustaWestland AW139 - Australian Army & Various (JYAI) V.1.0
2026-07-06
Repaint Eurofighter Typhoon - German AF 2026 Update (JYAI) V.1.0
2026-07-02
AI SIAI-Marchetti SF.260 EA/M (JTAI) V.1.0
2026-06-28


