Middle Wallop

Garysb · Post by **Garysb** » 05 Oct 2008, 20:28

Anyone got a good AFCAD for Middle Wallop I can use for the Apache Scenery
Or one I can use as a base

Cheers

gary

KevinJarvis · Post by **KevinJarvis** » 05 Oct 2008, 20:54

WOW..there isn't anything out there for this is there?

Keith Jones · Post by **Keith Jones** » 07 Oct 2008, 09:46

Gary. Check your PMs.

Garysb · Post by **Garysb** » 08 Oct 2008, 19:31

I give up on this one
Can someone supply me with the runway info
Size width etc

I will have to start from scratch

thanks

Gary

Ford Friendly · Post by **Ford Friendly** » 08 Oct 2008, 21:05

Middle Wallop airfield is situated on the A343 between Andover and Salisbury, 6 miles WSW of Andover.

The site had 5 C types and 4 Blister hangers, an all grass landing area with a maximum available landing run of 4,200 feet, this was later extended to 5,700 feet, with concrete taxi way around the landing area and hardstandings
source: http://www.btinternet.com/~faahistorywe ... cher-2.htm

You might also want to take a look at http://www.controltowers.co.uk/M/Middle_Wallop.htm
which say that the runways are "Grass with concrete perimeter track, 1942 - 2x Sommerfield track steel mat"

CelticWarrior · Post by **CelticWarrior** » 09 Oct 2008, 10:30

Gary, PM inbound.

Garysb · Post by **Garysb** » 14 Oct 2008, 15:11

Would you believe it
I spent most of the weekend doing an AFCAD with up to date info supplied by Celtic which diddnt match GE. Then GE changed the picture on Sunday night!

Someones winding me up!

Gary

CelticWarrior · Post by **CelticWarrior** » 14 Oct 2008, 15:20

I heard they're building fixed runways there too. And next year they're enlarging the dispersal and building a new hangar for the Army's new Harrrier force.

Just kidding

jimrodger · Post by **jimrodger** » 14 Oct 2008, 19:04

Hopefully you may manage to make some use of this.

Jim

Garysb · Post by **Garysb** » 14 Oct 2008, 19:15

Thanks Jim

I have got one of those, its nearly done now

but thanks again

Parking to add then split up into 3 Afcads

Cheers

Gary

jimrodger · Post by **jimrodger** » 14 Oct 2008, 19:19

Looking good.....
have the full set of documentation, so if you need anything else just call

lowlevelRAF · Post by **lowlevelRAF** » 21 Nov 2008, 19:22

army harriers?? when?? Also is there a ai lynx or gazelle out? so we could have a big copter base on the go

Garysb · Post by **Garysb** » 21 Nov 2008, 20:48

lowlevelRAF wrote:army harriers??

No Army Harriers

Might be something else though!

Gary

lowlevelRAF · Post by **lowlevelRAF** » 21 Nov 2008, 21:29

vanguard 954 · Post by **vanguard 954** » 27 Nov 2008, 10:13

Ai Gazelle available at Hovercontrol in the Ai Heli2 file.Look for it in the misc. section on the downloads page.Several mil. repaints also available,RAF_AAC Gazelle,probably the best one.No ai Lynx that I know of,there was one being developed by UKMIL,but this appears to have been shelved.

Garysb · Post by **Garysb** » 27 Nov 2008, 11:51

vanguard 954 wrote:Ai Gazelle available at Hovercontrol in the Ai Heli2 file.Look for it in the misc. section on the downloads page.Several mil. repaints also available,RAF_AAC Gazelle,probably the best one.No ai Lynx that I know of,there was one being developed by UKMIL,but this appears to have been shelved.

Sorry Vanguard
These are not true AI models (Low poly multi LOD) just converts and as such we would not use them

But look out for the WAH-64 and Chinnook comming soon

Cheers

Gary

Middle Wallop

Middle Wallop

Will this help?

Middle Wallop

Re: Middle Wallop