The download hangar is currently disabled. We're doing our best to bring it back as soon as possible.
Could be trouble at the mill again!
- Garysb
- MAIW Developer
- Posts: 2807
- Joined: 11 Aug 2006, 19:33
- Version: FSX
- Location: Scunthorpe, North Lincolnshire, UK
Could be trouble at the mill again!
I believe that every human has a finite number of heart-beats. I don't intend to waste any of mine running around doing exercises.
Buzz Aldrin (1930 -
Buzz Aldrin (1930 -
Re: Could be trouble at the mill again!
Well, if they try to invade again, they will be smashed, simple. Does this mean that no sea traffic can get into the islands or can they just approach them from the side opposite the Argies?
Re: Could be trouble at the mill again!
How many bases would we need to close to raise the cash to get down there again?
Mark
Mark
Mark
Re: Could be trouble at the mill again!
Just remember that we have at least one warship, four eurofighters (have the F3s been scrapped yet?) as well as a fully functional military base and a decent garrison already there. We could just deploy an air squadron that is currently in the UK, divert ships on exercise if they are nearby and load troops on to one of the RFA ships and sail them over. (The only problem would be helicopters-how many serviceable ones are actually in the UK?)
Of course, I know very little of military affairs, so this is just intelligent (ish) guesswork...
Of course, I know very little of military affairs, so this is just intelligent (ish) guesswork...
Re: Could be trouble at the mill again!
We have home field advantage this time, plus the Chileans won't mind if we trash the place.
Steve
_______________________________________________________
Quid Si Coelum Ruat
_______________________________________________________
_______________________________________________________
Quid Si Coelum Ruat
_______________________________________________________
- nickblack423
- MAIW Veteran
- Posts: 2155
- Joined: 11 Aug 2006, 21:43
- Version: FS9
- Location: Ipswich, UK
- Contact:
Re: Could be trouble at the mill again!
Oooh could be a first battle test for the Typhoon. Exciting stuff!! I don;t think the Argies will be that silly though... Will they?
Nick
Nick
Re: Could be trouble at the mill again!
More target practice for the Brits....
-Mike G.
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Re: Could be trouble at the mill again!
Might be time to dig out the mothballed Sea Harrier FA2 ( thats if we have not scrapped them already ).
A Naval fleet with no carrier based fighter cover would have me a tad concerned !!
A Naval fleet with no carrier based fighter cover would have me a tad concerned !!
-
- Major
- Posts: 765
- Joined: 26 Feb 2007, 09:33
- Version: FS9
- Location: 40kms west of EDHI (Airbus)
Re: Could be trouble at the mill again!
Last time Georgia - this time maybe the Falklands? Hm, Olympic Games seem to face harder political environments.
While colonies regained self governance or given back to surrounding countries I still think the world should stay as it is. Ok, as a German I claim Mallorca to be part of Germany We just have to get rid of the remaining Spanish people there and defeat those anually British summer invaders
While colonies regained self governance or given back to surrounding countries I still think the world should stay as it is. Ok, as a German I claim Mallorca to be part of Germany We just have to get rid of the remaining Spanish people there and defeat those anually British summer invaders
Jan
Former technician in MFG2 at ETME (home base of PANAVIA The flying computer TORNADO. sadly closed now)
Former technician in MFG2 at ETME (home base of PANAVIA The flying computer TORNADO. sadly closed now)
- CelticWarrior
- Lieutenant Colonel
- Posts: 1122
- Joined: 15 Aug 2006, 17:16
- Version: FSX
- Location: Llareggub
Re: Could be trouble at the mill again!
ScrappedTonkaRepairMan wrote:Might be time to dig out the mothballed Sea Harrier FA2 ( thats if we have not scrapped them already ).
But fear not! The international community will come to our aid if the Argies invade, just like they did last ...... ah no, maybe not. There'll just be some token resolutions from the UN again and we'll be left to go it alone once more.
Maybe some of our (so called) allies will once again sell weapons to our enemy.
"We attack tomorrow under cover of daylight! It's the last thing they'll be expecting ... a daylight charge across the minefield .."
Re: Could be trouble at the mill again!
Hopefully they're too busy counterfeiting our passports...CelticWarrior wrote:Maybe some of our (so called) allies will once again sell weapons to our enemy.
Dan
-
- MAIW Veteran
- Posts: 323
- Joined: 15 May 2007, 17:19
- Version: FS9
- Location: Cleethorpes, NE.Lincolnshire, UK
Re: Could be trouble at the mill again!
We could have help from anywhere.. there is oil there!!..
The Argies will have to cancel the school holidays to train the "new recruits".
The Argies will have to cancel the school holidays to train the "new recruits".
Time travel does exist, i just discovered it next week...
Re: Could be trouble at the mill again!
I wonder if we could hire XH558 from the Vulcan trust.
1 Vulcan + 4 Stormshadows + the entire tanker fleet = BLACKBUCK Episode II ( Return of Maggie )
1 Vulcan + 4 Stormshadows + the entire tanker fleet = BLACKBUCK Episode II ( Return of Maggie )
-
- Major
- Posts: 765
- Joined: 26 Feb 2007, 09:33
- Version: FS9
- Location: 40kms west of EDHI (Airbus)
Re: Could be trouble at the mill again!
C'mon Tonka, it's the 21 century. They have those Eurofighters now. If you need some old metal there are still older a/c available. Send some L-1011's, VC-10's or even Nimrods down there. (At least the Brits know how to keep oldtimers in the air.)
Jan
Former technician in MFG2 at ETME (home base of PANAVIA The flying computer TORNADO. sadly closed now)
Former technician in MFG2 at ETME (home base of PANAVIA The flying computer TORNADO. sadly closed now)
Re: Could be trouble at the mill again!
Perhaps we could stall the Argies untill JSF and the new super-carriers are ready. How about a 3pm kick-off on Fri 2nd April 2022 ?
- CelticWarrior
- Lieutenant Colonel
- Posts: 1122
- Joined: 15 Aug 2006, 17:16
- Version: FSX
- Location: Llareggub
Re: Could be trouble at the mill again!
Here's a pic of an Argentine flag in the snow
"We attack tomorrow under cover of daylight! It's the last thing they'll be expecting ... a daylight charge across the minefield .."
-
- Major
- Posts: 765
- Joined: 26 Feb 2007, 09:33
- Version: FS9
- Location: 40kms west of EDHI (Airbus)
Re: Could be trouble at the mill again!
Either Microsoft is wrong or you are. 2nd April 2022 is a Saturday Yeah, call me nitpickerTonkaRepairMan wrote:Perhaps we could stall the Argies untill JSF and the new super-carriers are ready. How about a 3pm kick-off on Fri 2nd April 2022 ?
Had a quick look at the AAF aircraft inventory. At least from their side it could be just a sequel. Mirage III/V, A4 and those Pucaras that several were shot down in the 80's.
In the end it would be a war (if it will even go that far) Argentine cannot win. It would just be a waste of material, money and lives.
Jan
Former technician in MFG2 at ETME (home base of PANAVIA The flying computer TORNADO. sadly closed now)
Former technician in MFG2 at ETME (home base of PANAVIA The flying computer TORNADO. sadly closed now)
- CelticWarrior
- Lieutenant Colonel
- Posts: 1122
- Joined: 15 Aug 2006, 17:16
- Version: FSX
- Location: Llareggub
Re: Could be trouble at the mill again!
Againsprocky wrote:It would just be a waste of material, money and lives.
"We attack tomorrow under cover of daylight! It's the last thing they'll be expecting ... a daylight charge across the minefield .."
Re: Could be trouble at the mill again!
The question is why, why are they doing this now? Is their memory really that short?
-Mike G.
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Re: Could be trouble at the mill again!
I think the argie president is doing it for votes-the ruling party is at about 20% approval atm (according to the Daily Telegraph at least)