And Again.... problems...
- Javier Tapia
- First Lieutenant
- Posts: 167
- Joined: 21 Sep 2006, 02:04
- Version: FS9
- Location: Santiago, Chile
- Contact:
And Again.... problems...
Hi guys...
I have the following problem i haven't been ablo to fix.. and it really bothers me.
I have an airport where some aircraft land way before the runway.. and then taxies in stright line until they finaly reach the runway and leave on the first taxiway they find, which is where all the departing traffic is waiting... causing ai trafic to get stuct...
Does anybody knows a possible solution to this?
Thanks!
I have the following problem i haven't been ablo to fix.. and it really bothers me.
I have an airport where some aircraft land way before the runway.. and then taxies in stright line until they finaly reach the runway and leave on the first taxiway they find, which is where all the departing traffic is waiting... causing ai trafic to get stuct...
Does anybody knows a possible solution to this?
Thanks!
Not a Member from the MAIW team, but giving my contributions whenever I can
-
- Lieutenant Colonel
- Posts: 823
- Joined: 08 Jul 2007, 22:15
- Version: FS9
- Javier Tapia
- First Lieutenant
- Posts: 167
- Joined: 21 Sep 2006, 02:04
- Version: FS9
- Location: Santiago, Chile
- Contact:
I happens with civilian traffic... what happens is that they desend from the cruise altitute too close to the airport and they simply go straight down (yes... a 737 with it's nose pointing at the water in exacly... or really close to 90°s) and then level at the airport ground altitute.
Since this is the only airport where it happens.... what could be the solution...
ohh...
The airport is Antofagasta SCFA... with the following AFD...
Since this is the only airport where it happens.... what could be the solution...
ohh...
The airport is Antofagasta SCFA... with the following AFD...
- Attachments
-
- SCFA_2006.bgl
- (15.25 KiB) Downloaded 10 times
Not a Member from the MAIW team, but giving my contributions whenever I can
Are these true AI aircraft that are doing this? Or are they user aircraft that are being used for AI purposes?
-Mike G.
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
- Javier Tapia
- First Lieutenant
- Posts: 167
- Joined: 21 Sep 2006, 02:04
- Version: FS9
- Location: Santiago, Chile
- Contact:
Hmmm........that is weird. Let me look at the afcad you are using. Are there any terrain issues in the area? Also does your altitude in your Airports.txt file match your altitude from the afcad??
EDIT: The afcad looks good. There is a one foot difference between the runway and the runway link elevation, but that shouldn't cause the problems you are experiencing.
EDIT: The afcad looks good. There is a one foot difference between the runway and the runway link elevation, but that shouldn't cause the problems you are experiencing.
Last edited by MIKE JG on 02 Aug 2008, 01:54, edited 1 time in total.
-Mike G.
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
- Javier Tapia
- First Lieutenant
- Posts: 167
- Joined: 21 Sep 2006, 02:04
- Version: FS9
- Location: Santiago, Chile
- Contact:
- Javier Tapia
- First Lieutenant
- Posts: 167
- Joined: 21 Sep 2006, 02:04
- Version: FS9
- Location: Santiago, Chile
- Contact:
Hi.. well looks like i fould the problem.... the mesh caused the problem...
Anyway... thanks Mike anf Ford...
Now with that solved... and an other problem caused by the mesh... i can continue with my project... i hope to release soon
Anyway... thanks Mike anf Ford...
Now with that solved... and an other problem caused by the mesh... i can continue with my project... i hope to release soon
Not a Member from the MAIW team, but giving my contributions whenever I can
We've run into plenty of issues related to terrain mesh, mostly in South America it seems, but glad to hear you got it figured out.
-Mike G.
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
Recovering flight sim addict, constant lurker.
Check out my real life RV-8 build here: RV-8 Builder Log
- Javier Tapia
- First Lieutenant
- Posts: 167
- Joined: 21 Sep 2006, 02:04
- Version: FS9
- Location: Santiago, Chile
- Contact:
Hi again... I ran into an other problem... hope you can help me again...
I got two airports that, no matter how many times I change the altitude in the AFD, they keep sinking, except for the runways that are floating to the right altitute.
The airports are SC0B and SCBE, they have custom AFD. I first thoght it was a problem with the mesh I had (wich has been erased due to the problems with SCFA) but now SC0B keeps bellow ground, and SCBE, that worked correctly started sinking...
I've added the AFDs, so if someone can give it a look I would much appreciate it... maybe there's someting I missed.
Thanks!
I got two airports that, no matter how many times I change the altitude in the AFD, they keep sinking, except for the runways that are floating to the right altitute.
The airports are SC0B and SCBE, they have custom AFD. I first thoght it was a problem with the mesh I had (wich has been erased due to the problems with SCFA) but now SC0B keeps bellow ground, and SCBE, that worked correctly started sinking...
I've added the AFDs, so if someone can give it a look I would much appreciate it... maybe there's someting I missed.
Thanks!
- Attachments
-
- AF2_SC0B.bgl
- (7.33 KiB) Downloaded 10 times
-
- AF2_SCBE.bgl
- (3.14 KiB) Downloaded 6 times
Not a Member from the MAIW team, but giving my contributions whenever I can
Javier, I wish I could solve your problem, but I can't. However, perhaps I can send you off on an Google advanced search adventure, that might prove productive.
About a half year ago or so, I was reading some material written by a guy who was into creating mesh files .. this is a hint on where to start your search .. and he mentioned that there can be more than one layer of mesh, only one of which will be the base for an afcad. He had explained a method for creating an artificial solid base to correct the problem you mention, or as an alternative, explained how to adjust the mesh to rise/sink to where you need the base for the afcad. It might take a little study to understand this, it was a little esoteric for me, but that is what you need to be looking for. Good Luck!
Ron
About a half year ago or so, I was reading some material written by a guy who was into creating mesh files .. this is a hint on where to start your search .. and he mentioned that there can be more than one layer of mesh, only one of which will be the base for an afcad. He had explained a method for creating an artificial solid base to correct the problem you mention, or as an alternative, explained how to adjust the mesh to rise/sink to where you need the base for the afcad. It might take a little study to understand this, it was a little esoteric for me, but that is what you need to be looking for. Good Luck!
Ron
- VulcanDriver
- MAIW Staff
- Posts: 4508
- Joined: 11 Aug 2006, 20:58
- Version: FSX
- Location: EGHH
I've had this problem. Its to do with the altitude set in the underlying MS tile used in FS9. You can change by using JABBGL which is at AVSIM.
May be able to resolve your problem.
HTH
John
May be able to resolve your problem.
HTH
John
Last edited by VulcanDriver on 04 Aug 2008, 17:49, edited 1 time in total.
John
"That is the biggest fool thing we have ever done. The A-bomb will never go off, and I speak as an expert in explosives." - Admiral William Leahy
"That is the biggest fool thing we have ever done. The A-bomb will never go off, and I speak as an expert in explosives." - Admiral William Leahy
- Javier Tapia
- First Lieutenant
- Posts: 167
- Joined: 21 Sep 2006, 02:04
- Version: FS9
- Location: Santiago, Chile
- Contact:
OK I had a quick look and found that the heights of the default MS scenery are 3475' for SCBE and 3000' for SC0B.
Now looking at the afcads I found that the heights are massively different, 3971.50' for SCBE and 3267.20' for SC0B.
Now if the traffic disappears w/o a trace or never appears as its so far below the horizon then its probable that this is the problem, normally however you sink a few feet below. Now this could be due to a couple of things on the afcads themselves. Both airfields have the height of the start locations, on the runways below the height of the runway, this may at least be part of the problem.
I would try amending the starting location for each runway, to see if that makes a difference.
Now looking at the afcads I found that the heights are massively different, 3971.50' for SCBE and 3267.20' for SC0B.
Now if the traffic disappears w/o a trace or never appears as its so far below the horizon then its probable that this is the problem, normally however you sink a few feet below. Now this could be due to a couple of things on the afcads themselves. Both airfields have the height of the start locations, on the runways below the height of the runway, this may at least be part of the problem.
I would try amending the starting location for each runway, to see if that makes a difference.
Steve
_______________________________________________________
Quid Si Coelum Ruat
_______________________________________________________
_______________________________________________________
Quid Si Coelum Ruat
_______________________________________________________
- Javier Tapia
- First Lieutenant
- Posts: 167
- Joined: 21 Sep 2006, 02:04
- Version: FS9
- Location: Santiago, Chile
- Contact: