The download hangar is currently disabled. We're doing our best to bring it back as soon as possible.
Traffic for copters (on skids)
Traffic for copters (on skids)
I got lost in the forest .
Does AI traffic for copters on skids needs different procedure? P3Dv5.
I took new Huey of mins: https://militaryaiworks.com/forums/20/1 ... 85#p203985 .
I converted it to P3Dv5 with animations, transparent textures ect and its ok:
I set up test flight:
but I dont see this model . If I do the same with aircraft, no problem. Any idea?
Btw. AI Huey is in Rotorcraft folder, but I think it isnt a problem, AI FP sees it.
Does AI traffic for copters on skids needs different procedure? P3Dv5.
I took new Huey of mins: https://militaryaiworks.com/forums/20/1 ... 85#p203985 .
I converted it to P3Dv5 with animations, transparent textures ect and its ok:
I set up test flight:
but I dont see this model . If I do the same with aircraft, no problem. Any idea?
Btw. AI Huey is in Rotorcraft folder, but I think it isnt a problem, AI FP sees it.
Webmaster of yoyosims.pl.
Re: Traffic for copters (on skids)
Do you have parking spots large enough for the huey at both airfields?
Re: Traffic for copters (on skids)
Maybe this (but think yes), I'll check.
Webmaster of yoyosims.pl.
Re: Traffic for copters (on skids)
I checked, looks ok for me:
maybe I must add something here, but I checek few AI traffic airplanes and was empty also:
Edit. No it doesnt help, still no Huey.
maybe I must add something here, but I checek few AI traffic airplanes and was empty also:
Edit. No it doesnt help, still no Huey.
Webmaster of yoyosims.pl.
Re: Traffic for copters (on skids)
I take old, FS9 MAIW Chinook, updated it to P3Dv5 and.... the same airfield it works:
So maybe something is wrong with this UH-1? Any idea?
So maybe something is wrong with this UH-1? Any idea?
Webmaster of yoyosims.pl.
Re: Traffic for copters (on skids)
I would do an error check on the huey with AI Aircraft Editor or equivalent at this point just in case there is a config issue.
Re: Traffic for copters (on skids)
Thx. Installed, but Im not sure its ok or not:
Edit. I noticed here no air file, but its present in the folder, will check again <--- ok, my foul, I see it now.
BUT I noticed that if will be the take off hour the copter (whole!) disappears suddenly. Skids?
Webmaster of yoyosims.pl.
Re: Traffic for copters (on skids)
Ok, here is my conversion to P3Dv5 (just one model - take BOX version) for tests if someone wants to test it in the flight and start issue .... (removed, see below)
Last edited by YoYo on 10 May 2021, 16:14, edited 3 times in total.
Webmaster of yoyosims.pl.
Re: Traffic for copters (on skids)
OK One glaring issue there is the massive red "AC Status NOK" box.
I also notice that you have quite a small window. If you were to extend the window on the right hand side you would find a "Show Aircraft Errors" button.
Pressing this will probably tell you the problem(s).
Now if there is no button there then you should upgrade to the latest version 3.3.33.0
Steve
_______________________________________________________
Quid Si Coelum Ruat
_______________________________________________________
_______________________________________________________
Quid Si Coelum Ruat
_______________________________________________________
Re: Traffic for copters (on skids)
Thx Steve.
So, I think you are talking about not AIAE but AIAE.NET version because I see info about "no update" for this my version what I took.
Ok, I take AIAE.NET-Setup (from MAIW website: https://militaryaiworks.com/download-ha ... y/91-tools ) but here its unpacking error from Windows 10 and 7z/zip too wrrrr ....
Edited: links on Avsim works https://library.avsim.net/download.php?DLID=208973 .
So, I think you are talking about not AIAE but AIAE.NET version because I see info about "no update" for this my version what I took.
Ok, I take AIAE.NET-Setup (from MAIW website: https://militaryaiworks.com/download-ha ... y/91-tools ) but here its unpacking error from Windows 10 and 7z/zip too wrrrr ....
Edited: links on Avsim works https://library.avsim.net/download.php?DLID=208973 .
Webmaster of yoyosims.pl.
Re: Traffic for copters (on skids)
How it looks with this (btw. great tool!):
I think now its ok, missing models are intentional but as I wrote, model disappears suddenly on ramp parking at start hour exactly (before start h it's present).
I think now its ok, missing models are intentional but as I wrote, model disappears suddenly on ramp parking at start hour exactly (before start h it's present).
Webmaster of yoyosims.pl.
- John Young
- MAIW Developer
- Posts: 4226
- Joined: 12 Jul 2008, 15:15
Re: Traffic for copters (on skids)
That's usually because the parking spot is not connected to the taxiway and the aircraft has nowhere to go and disappears. It's not a LOD issue because Mins doesn't use them.
John
PS: just tested in my P3Dv4.
I can see the Huey out as far as at least 5 miles, so no problem with the model.
The hover-taxi is working fine, but the take-off is quite long - more like a Stemme .air file than an animated lift, even a STOL one.
John
PS: just tested in my P3Dv4.
I can see the Huey out as far as at least 5 miles, so no problem with the model.
The hover-taxi is working fine, but the take-off is quite long - more like a Stemme .air file than an animated lift, even a STOL one.
Re: Traffic for copters (on skids)
Thx John, I will look on this too.
Edit:
I think its ok, connected (I miss something here?). Huey appears in the middle position.
New updated for v5 version (box), I added pilots and boxes (small problem with head of gunner - direction and animation so I removed it). Really nice job mins!
Link (WiP for tests): https://www.sendspace.com/file/z2hpyy
(btw. I noticed small glitch with texture on the top, the arrow, will do in the next version).
Checked, looks like in model, hard coded (?):
Edit:
I think its ok, connected (I miss something here?). Huey appears in the middle position.
New updated for v5 version (box), I added pilots and boxes (small problem with head of gunner - direction and animation so I removed it). Really nice job mins!
Link (WiP for tests): https://www.sendspace.com/file/z2hpyy
(btw. I noticed small glitch with texture on the top, the arrow, will do in the next version).
Checked, looks like in model, hard coded (?):
Last edited by YoYo on 11 May 2021, 05:35, edited 1 time in total.
Webmaster of yoyosims.pl.
Re: Traffic for copters (on skids)
I think that those panels are green tinted glass, in real life. Somebody with more knowledge on the aircraft will be able to confirm.
Steve
_______________________________________________________
Quid Si Coelum Ruat
_______________________________________________________
_______________________________________________________
Quid Si Coelum Ruat
_______________________________________________________
Re: Traffic for copters (on skids)
Windows are correct, I wrote about this part for cutting lines - chisel (in English ?).
Webmaster of yoyosims.pl.
Re: Traffic for copters (on skids)
Ok, finally it works for me, I changed parking place:
Also it needs some of tweeks for P3Dv5 still, Tomorrow I will finish it I hope.
Also it needs some of tweeks for P3Dv5 still, Tomorrow I will finish it I hope.
Webmaster of yoyosims.pl.
Re: Traffic for copters (on skids)
This is a test version. There is only 1LOD.I think it's too difficult to convert.
There is the simplest way. That's to ask for help from the Developer, Mins.
Mins has a source. Anything can be converted into that.
There is the simplest way. That's to ask for help from the Developer, Mins.
Mins has a source. Anything can be converted into that.
- John Young
- MAIW Developer
- Posts: 4226
- Joined: 12 Jul 2008, 15:15
Re: Traffic for copters (on skids)
I don't think Mins knows how to create LODs, but I know designers here have tried to help him. I would also check that the long take-off run that I observed was as intended and if not, that the Hover-Taxi animation has actually been linked to the vertical lift.
John
John